$6.00
180W AC Cable for DJI Inspire 1 180W Power Adapter or DJI Inspire 2 180W Power Adapter.
Note: This cable is used with North American electrical outlets only.
$1,259.00
DIALS, LEVERS, and KNOBS
The two knobs on the front panel control gimbal pitch and yaw, and the right/left levers and Focus Adjustment Knob are used to tune flight controller settings and the gimbal camera in real-time, allowing the operator to focus and set aperture.
CAMERA SETTINGS
For quick camera adjustments, the operator can customize several shortcut buttons for particular groups of settings, or save frequently used settings.
CUSTOM CONTROL
Customizable buttons can quickly enable or disable frequently used functions like focus peaking, color waveform, obstacle avoidance, and home point resetting; or close warnings and tips midflight, all without using an app.
BUTTON COMBINATIONS
Rotate the dials or the toggle the right/left levers while holding applicable buttons to control gimbal roll, shutter speed, aperture, or ISO.
DETACHABLE DESIGN, CRYSTALSKY COMPATIBILITY
The CrystalSky monitor mounts to the Cendence remote controller via the Cendence Monitor Mounting Bracket.
The Cendence remote controller’s antennas, PCB, mounting bracket, and battery are all detachable, making its hardware easily upgradable, allowing you to customize the controller for compatibility with future DJI aircraft.
DUAL OPERATOR CONTROL
When precision camera control is required, the Cendence remote controller can connect as either a master or slave controller with the Inspire 2’s remote controller or another Cendence remote controller.
MULTIPLE PORTS
BATTERY SYSTEM
Cendence uses a detachable battery that operates for up to four hours. If you run out of power, just swap in a charged battery or charge Cendence via the power port. Cendence uses the same batteries as CrystalSky monitors, reducing accessories.
IN THE BOX
Cendence Remote Controller × 1
WB37 Intelligent Battery × 1
Cendence Monitor Mounting Bracket × 1
Cendence Remote Controller Support Rig × 1
Screwdriver × 1
Screw × 2
Cendence Control Stick Cover × 2
Cendence Control Stick Cover Mounting Key × 1
Remote Controller Strap × 1
$29.00
The control stick covers protect your equipment by preventing dust from entering the remote controller through the moving surfaces at the base of the control sticks. The elastomeric bellow design maintains smooth and reliable movement of the control sticks.
$29.00
Mobile devices can be mounted to the Cendence Remote Controller via the Cendence Mobile Device Holder. Devices up to 170mm wide are supported. Compatible devices include the Apple iPhone and iPad.
Note: Refer to Cendence remote controller specifications for full device compatibility details.
$469.00
Created for outdoor aerial imaging, the CrystalSky monitor features an ultra-bright screen that is clearly visible in sunlight. It is designed from the ground up to work seamlessly with the DJI GO/DJI GO 4 app, giving camera operators total control.
SMOOTHER VIDEO DISPLAY
The CrystalSky monitor uses optimized video decoding to decode video in real-time. Due to limitations in software access on smartphones and tablets, video decoding in other smart devices is less than ideal. When used to view photos or videos transmitted by the camera, problems can occur including video jitter, long latency and more. The CrystalSky monitor’s optimized decoder provides smooth, real-time video with minimal latency.
CUSTOMIZED SYSTEM AND DJI GO/DJI GO 4
A newly designed system removes unnecessary Android apps and services and is resistant to viruses and junk software. This ensures that the CrystalSky monitor is able to offer optimum performance at all times. Its embedded DJI GO/DJI GO 4 app provides full access to all DJI GO/DJI GO 4 features including aircraft parameter adjustment, camera control, footage management, and playback. Using offline maps, maps can be kept available even if going out of Wi-Fi reach.
POWER SUPPLY
A two cell 4920 mAh secondary external battery gives the CrystalSky monitor a longer operating time than comparable mobile devices. It supports quick charge, and controls its discharge rate well even in low temperatures. Used with the 7.85" and 5.5" screens, it can achieve a maximum operation time of 4-5 hours and 5-6 hours respectively.
DUAL SD CARD SLOTS
Equipped with dual Micro SD Card slots, the CrystalSky monitor’s storage can be extended, or footage recorded on a Micro SD Card can be played back directly on the monitor. It can also be used for footage backups. Using editors built in DJI GO/DJI GO 4, high-quality edits can be made quickly and instantly shared to social media.
The CrystalSky monitor supports H.264 and H.265 video decoding, allowing it to play back these files at 30 fps and 60 fps respectively. These videos can also be output through its HDMI port.
PORTS AND NETWORK
The CrystalSky monitor’s HDMI port allows up to 4K video to be output to FPV goggles and other display devices. Built-in dual band Wi-Fi means it can connect to Wi-Fi networks and Wi-Fi hotspots from mobile devices, and it is also compatible with 4G dongles and USB storage through its USB-A port.
When connected to the internet, the CrystalSky monitor gets easy access to system upgrades, livestreaming, photo or video sharing, data synchronization and more. File sizes are optimized as much as possible to minimize mobile data demands.
Onboard Micro USB and USB-C ports make it convenient to connect the CrystalSky monitor with a remote controller or other devices.
EXTREME TEMPERATURE OPTIMIZED
Most smart devices are designed to operate in common temperature ranges. The CrystalSky monitor's external battery has been designed for more extreme temperatures. It is able to operate in as low as -4°F (-20°C) and, with its internal cooling system, functions normally in temperatures as high as 104°F (40°C).
DJI AERIAL SYSTEM COMPATIBILITY
The CrystalSky monitor can quickly connect to the Inspire series, Phantom 4 series, Phantom 3 series (Phantom 3 Professional, Phantom 3 Advanced), Matrice series, and Osmo series (except the Osmo Mobile) over Wi-Fi or via a remote controller USB port, depending on your specific product.* Also, CrystalSky easily attaches to the Cendence remote controller without an additional mounting bracket.
IN THE BOX
CrystalSky Monitor ×1
Intelligent Battery ×1
Intelligent Battery Charging Hub ×1
$699.00
Created for outdoor aerial imaging, the CrystalSky monitor features an ultra-bright screen that is clearly visible in sunlight. It is designed from the ground up to work seamlessly with the DJI GO/DJI GO 4 app, giving camera operators total control.
SMOOTHER VIDEO DISPLAY
The CrystalSky monitor uses optimized video decoding to decode video in real-time. Due to limitations in software access on smartphones and tablets, video decoding in other smart devices is less than ideal. When used to view photos or videos transmitted by the camera, problems can occur including video jitter, long latency and more. The CrystalSky monitor’s optimized decoder provides smooth, real-time video with minimal latency.
CUSTOMIZED SYSTEM AND DJI GO/DJI GO 4
A newly designed system removes unnecessary Android apps and services and is resistant to viruses and junk software. This ensures that the CrystalSky monitor is able to offer optimum performance at all times. Its embedded DJI GO/DJI GO 4 app provides full access to all DJI GO/DJI GO 4 features including aircraft parameter adjustment, camera control, footage management, and playback. Using offline maps, maps can be kept available even if going out of Wi-Fi reach.
POWER SUPPLY
A two cell 4920 mAh secondary external battery gives the CrystalSky monitor a longer operating time than comparable mobile devices. It supports quick charge, and controls its discharge rate well even in low temperatures. Used with the 7.85" and 5.5" screens, it can achieve a maximum operation time of 4-5 hours and 5-6 hours respectively.
DUAL SD CARD SLOTS
Equipped with dual Micro SD Card slots, the CrystalSky monitor’s storage can be extended, or footage recorded on a Micro SD Card can be played back directly on the monitor. It can also be used for footage backups. Using editors built in DJI GO/DJI GO 4, high-quality edits can be made quickly and instantly shared to social media.
The CrystalSky monitor supports H.264 and H.265 video decoding, allowing it to play back these files at 30 fps and 60 fps respectively. These videos can also be output through its HDMI port.
PORTS AND NETWORK
The CrystalSky monitor’s HDMI port allows up to 4K video to be output to FPV goggles and other display devices. Built-in dual band Wi-Fi means it can connect to Wi-Fi networks and Wi-Fi hotspots from mobile devices, and it is also compatible with 4G dongles and USB storage through its USB-A port.
When connected to the internet, the CrystalSky monitor gets easy access to system upgrades, livestreaming, photo or video sharing, data synchronization and more. File sizes are optimized as much as possible to minimize mobile data demands.
Onboard Micro USB and USB-C ports make it convenient to connect the CrystalSky monitor with a remote controller or other devices.
EXTREME TEMPERATURE OPTIMIZED
Most smart devices are designed to operate in common temperature ranges. The CrystalSky monitor's external battery has been designed for more extreme temperatures. It is able to operate in as low as -4°F (-20°C) and, with its internal cooling system, functions normally in temperatures as high as 104°F (40°C).
DJI AERIAL SYSTEM COMPATIBILITY
The CrystalSky monitor can quickly connect to the Inspire series, Phantom 4 series, Phantom 3 series (Phantom 3 Professional, Phantom 3 Advanced), Matrice series, and Osmo series (except the Osmo Mobile) over Wi-Fi or via a remote controller USB port, depending on your specific product.* Also, CrystalSky easily attaches to the Cendence remote controller without an additional mounting bracket.
IN THE BOX
CrystalSky Monitor ×1
Intelligent Battery ×1
Intelligent Battery Charging Hub ×1
$999.00
Created for outdoor aerial imaging, the CrystalSky monitor features an ultra-bright screen that is clearly visible in sunlight. It is designed from the ground up to work seamlessly with the DJI GO/DJI GO 4 app, giving camera operators total control.
SMOOTHER VIDEO DISPLAY
The CrystalSky monitor uses optimized video decoding to decode video in real-time. Due to limitations in software access on smartphones and tablets, video decoding in other smart devices is less than ideal. When used to view photos or videos transmitted by the camera, problems can occur including video jitter, long latency and more. The CrystalSky monitor’s optimized decoder provides smooth, real-time video with minimal latency.
CUSTOMIZED SYSTEM AND DJI GO/DJI GO 4
A newly designed system removes unnecessary Android apps and services and is resistant to viruses and junk software. This ensures that the CrystalSky monitor is able to offer optimum performance at all times. Its embedded DJI GO/DJI GO 4 app provides full access to all DJI GO/DJI GO 4 features including aircraft parameter adjustment, camera control, footage management, and playback. Using offline maps, maps can be kept available even if going out of Wi-Fi reach.
POWER SUPPLY
A two cell 4920 mAh secondary external battery gives the CrystalSky monitor a longer operating time than comparable mobile devices. It supports quick charge, and controls its discharge rate well even in low temperatures. Used with the 7.85" and 5.5" screens, it can achieve a maximum operation time of 4-5 hours and 5-6 hours respectively.
DUAL SD CARD SLOTS
Equipped with dual Micro SD Card slots, the CrystalSky monitor’s storage can be extended, or footage recorded on a Micro SD Card can be played back directly on the monitor. It can also be used for footage backups. Using editors built in DJI GO/DJI GO 4, high-quality edits can be made quickly and instantly shared to social media.
The CrystalSky monitor supports H.264 and H.265 video decoding, allowing it to play back these files at 30 fps and 60 fps respectively. These videos can also be output through its HDMI port.
PORTS AND NETWORK
The CrystalSky monitor’s HDMI port allows up to 4K video to be output to FPV goggles and other display devices. Built-in dual band Wi-Fi means it can connect to Wi-Fi networks and Wi-Fi hotspots from mobile devices, and it is also compatible with 4G dongles and USB storage through its USB-A port.
When connected to the internet, the CrystalSky monitor gets easy access to system upgrades, livestreaming, photo or video sharing, data synchronization and more. File sizes are optimized as much as possible to minimize mobile data demands.
Onboard Micro USB and USB-C ports make it convenient to connect the CrystalSky monitor with a remote controller or other devices.
EXTREME TEMPERATURE OPTIMIZED
Most smart devices are designed to operate in common temperature ranges. The CrystalSky monitor's external battery has been designed for more extreme temperatures. It is able to operate in as low as -4°F (-20°C) and, with its internal cooling system, functions normally in temperatures as high as 104°F (40°C).
DJI AERIAL SYSTEM COMPATIBILITY
The CrystalSky monitor can quickly connect to the Inspire series, Phantom 4 series, Phantom 3 series (Phantom 3 Professional, Phantom 3 Advanced), Matrice series, and Osmo series (except the Osmo Mobile) over Wi-Fi or via a remote controller USB port, depending on your specific product.* Also, CrystalSky easily attaches to the Cendence remote controller without an additional mounting bracket.
IN THE BOX
CrystalSky Monitor ×1
Intelligent Battery ×1
Intelligent Battery Charging Hub ×1
$79.00
The mounting bracket can be used to mount the CrystalSky monitor onto the following DJI series remote controller shown below:
Matrice Series
Inspire Series
Phantom 4 Series
Phantom 3 Professional
Phantom 3 Advanced
*Remote controller not included
$59.00
Connect two CrystalSky/Cendence Intelligent Batteries and charge them in sequence. The battery with more stored power will charge first.
SPECIFICATIONS
Model: WCH2
Input Voltage: 17.3–26.2 V
Output Voltage and Current: 8.7 V, 6 A; 5 V, 2 A
$59.00
OPERATING TIME
CrystalSky 7.85" monitor: 4 to 5 hours
CrystalSky 5.5" monitor: 5 to 6 hours
Cendence remote controller: 4 hours
SPECIFICATIONS
Capacity: 4920 mAh
Voltage: 7.6 V
Battery Type: LiPo
Energy: 37.39 Wh
Price: Select "Get Custom Package Quote" in Cart
This is a special order product - Please allow 7-10 days for shipment
Unlock the Possibility of Sight
Thermal imaging from the air has never been as easy as it is with the DJI Zenmuse XT. By combining DJI’s unrivaled expertise in gimbal technology and image transmission with the industry leading thermal imaging technology of FLIR, the Zenmuse XT is the ultimate solution for rapid and reliable aerial thermal imaging. Capture faster, with pinpoint precision, over large areas, then save them for analysis and reporting.
Note: The video below is for demonstration purposes only and may not represent actual product.
Integrated Thermal Camera
The camera on the DJI Zenmuse XT is developed by FLIR. It provides high-sensitivity (50mK) infrared scanning at 640/30 fps or 336/60 fps depending on the camera model. This sensitivity provides accurate temperature measurements ideal for analytics and telemetry. Both cameras are available with four lens options to meet different business needs. Stabilized and controlled by a custom DJI gimbal, it provides smooth, clear imagery and 360 degrees of seamless rotational movement.
FLIR+DJI=Powerful Airborne Solutions
DJI’s Zenmuse gimbal technology has become the industry standard among demanding aerial cinematographers, and everything that makes DJI’s aerial platforms world-class for cinematography also makes them the perfect platforms for aerial thermal imaging: they’re stable, easy to fly, and fully-integrated with apps.
When you get right down to it, the main purpose of any drone is to position a sensor in three-dimensional space; when that sensor is a FLIR thermal imager, you expand the possibilities for drone operators and thermal inspectors alike. Using FLIR thermal imaging from small drones brings new capabilities to dozens of applications like search and rescue, the inspection of power lines, cell towers, bridges, substations, and buildings, firefighting, precision agriculture, and natural resource and wildlife protection.
See the unseen. FLIR cameras reveal details invisible to the naked eye by making subtle differences in temperature visible. This new view on the world can reveal when equipment or buildings are damaged, the location of lost people and much more. Applications like:
Image Enhancement Software
Infra-red imagery requires optimization to ensure maximum definition for capturing information. The Zenmuse XT features a suite of image enhancements designed by FLIR including Digital Detail Enhancement™ (DDE); Smart Scene Optimization™ (SSO), which enhances extremes in bi-modal scenes; Active Contrast Enhancement™ (ACE) that adjusts scene contrast relative to its temperature difference; and Information Based HEQ™ (IBHEQ) which compresses complex image data to create the best quality image.
Fingertip Control
The Zenmuse XT can be controlled completely through the DJI GO app, providing a real-time, low latency view of what the camera sees, and instant access to core camera functions including:
Mission Ready
Mounted on the Inspire 1, the Zenmuse XT is ready to launch in seconds. Its seamless integration gives you access to important features like DJI’s powerful Lightbridge video transmission system, automated Point of Interest, Course and Home Lock, Follow Me, and the DJI SDK.
*Inspire 1: Flight times vary based on flight conditions, with a maximum 22 minute flight time being recorded when hovering with a TB48 battery using the Zenmuse XT gimbal camera.
*M100: Flight times vary based on payload and flight conditions, with a maximum 35 minute flight time being recorded when hovering with dual TB48D batteries and no additional payload other than a Zenmuse XT gimbal camera.
*M600: Flight time not available.
Additional information on the FLIR camera can be found in DJI Zenmuse XT Specifications.
A tutorial on capturing great thermal images can be found here.
Price: Select "Get Custom Package Quote" in Cart
This is a special order product - Please allow 7-10 days for shipment
Unlock the Possibility of Sight
Thermal imaging from the air has never been as easy as it is with the DJI Zenmuse XT. By combining DJI’s unrivaled expertise in gimbal technology and image transmission with the industry leading thermal imaging technology of FLIR, the Zenmuse XT is the ultimate solution for rapid and reliable aerial thermal imaging. Capture faster, with pinpoint precision, over large areas, then save them for analysis and reporting.
Note: The video below is for demonstration purposes only and may not represent actual product.
Integrated Thermal Camera
The camera on the DJI Zenmuse XT is developed by FLIR. It provides high-sensitivity (50mK) infrared scanning at 640/30 fps or 336/60 fps depending on the camera model. This sensitivity provides accurate temperature measurements ideal for analytics and telemetry. Both cameras are available with four lens options to meet different business needs. Stabilized and controlled by a custom DJI gimbal, it provides smooth, clear imagery and 360 degrees of seamless rotational movement.
FLIR+DJI=Powerful Airborne Solutions
DJI’s Zenmuse gimbal technology has become the industry standard among demanding aerial cinematographers, and everything that makes DJI’s aerial platforms world-class for cinematography also makes them the perfect platforms for aerial thermal imaging: they’re stable, easy to fly, and fully-integrated with apps.
When you get right down to it, the main purpose of any drone is to position a sensor in three-dimensional space; when that sensor is a FLIR thermal imager, you expand the possibilities for drone operators and thermal inspectors alike. Using FLIR thermal imaging from small drones brings new capabilities to dozens of applications like search and rescue, the inspection of power lines, cell towers, bridges, substations, and buildings, firefighting, precision agriculture, and natural resource and wildlife protection.
See the unseen. FLIR cameras reveal details invisible to the naked eye by making subtle differences in temperature visible. This new view on the world can reveal when equipment or buildings are damaged, the location of lost people and much more. Applications like:
Image Enhancement Software
Infra-red imagery requires optimization to ensure maximum definition for capturing information. The Zenmuse XT features a suite of image enhancements designed by FLIR including Digital Detail Enhancement™ (DDE); Smart Scene Optimization™ (SSO), which enhances extremes in bi-modal scenes; Active Contrast Enhancement™ (ACE) that adjusts scene contrast relative to its temperature difference; and Information Based HEQ™ (IBHEQ) which compresses complex image data to create the best quality image.
Fingertip Control
The Zenmuse XT can be controlled completely through the DJI GO app, providing a real-time, low latency view of what the camera sees, and instant access to core camera functions including:
Mission Ready
Mounted on the Inspire 1, the Zenmuse XT is ready to launch in seconds. Its seamless integration gives you access to important features like DJI’s powerful Lightbridge video transmission system, automated Point of Interest, Course and Home Lock, Follow Me, and the DJI SDK.
*Inspire 1: Flight times vary based on flight conditions, with a maximum 22 minute flight time being recorded when hovering with a TB48 battery using the Zenmuse XT gimbal camera.
*M100: Flight times vary based on payload and flight conditions, with a maximum 35 minute flight time being recorded when hovering with dual TB48D batteries and no additional payload other than a Zenmuse XT gimbal camera.
*M600: Flight time not available.
Additional information on the FLIR camera can be found in DJI Zenmuse XT Specifications.
A tutorial on capturing great thermal images can be found here.
Price: Select "Get Custom Package Quote" in Cart
This is a special order product - Please allow 7-10 days for shipment
Unlock the Possibility of Sight
Thermal imaging from the air has never been as easy as it is with the DJI Zenmuse XT. By combining DJI’s unrivaled expertise in gimbal technology and image transmission with the industry leading thermal imaging technology of FLIR, the Zenmuse XT is the ultimate solution for rapid and reliable aerial thermal imaging. Capture faster, with pinpoint precision, over large areas, then save them for analysis and reporting.
Note: The video below is for demonstration purposes only and may not represent actual product.
Integrated Thermal Camera
The camera on the DJI Zenmuse XT is developed by FLIR. It provides high-sensitivity (50mK) infrared scanning at 640/30 fps or 336/60 fps depending on the camera model. This sensitivity provides accurate temperature measurements ideal for analytics and telemetry. Both cameras are available with four lens options to meet different business needs. Stabilized and controlled by a custom DJI gimbal, it provides smooth, clear imagery and 360 degrees of seamless rotational movement.
FLIR+DJI=Powerful Airborne Solutions
DJI’s Zenmuse gimbal technology has become the industry standard among demanding aerial cinematographers, and everything that makes DJI’s aerial platforms world-class for cinematography also makes them the perfect platforms for aerial thermal imaging: they’re stable, easy to fly, and fully-integrated with apps.
When you get right down to it, the main purpose of any drone is to position a sensor in three-dimensional space; when that sensor is a FLIR thermal imager, you expand the possibilities for drone operators and thermal inspectors alike. Using FLIR thermal imaging from small drones brings new capabilities to dozens of applications like search and rescue, the inspection of power lines, cell towers, bridges, substations, and buildings, firefighting, precision agriculture, and natural resource and wildlife protection.
See the unseen. FLIR cameras reveal details invisible to the naked eye by making subtle differences in temperature visible. This new view on the world can reveal when equipment or buildings are damaged, the location of lost people and much more. Applications like:
Image Enhancement Software
Infra-red imagery requires optimization to ensure maximum definition for capturing information. The Zenmuse XT features a suite of image enhancements designed by FLIR including Digital Detail Enhancement™ (DDE); Smart Scene Optimization™ (SSO), which enhances extremes in bi-modal scenes; Active Contrast Enhancement™ (ACE) that adjusts scene contrast relative to its temperature difference; and Information Based HEQ™ (IBHEQ) which compresses complex image data to create the best quality image.
Fingertip Control
The Zenmuse XT can be controlled completely through the DJI GO app, providing a real-time, low latency view of what the camera sees, and instant access to core camera functions including:
Mission Ready
Mounted on the Inspire 1, the Zenmuse XT is ready to launch in seconds. Its seamless integration gives you access to important features like DJI’s powerful Lightbridge video transmission system, automated Point of Interest, Course and Home Lock, Follow Me, and the DJI SDK.
*Inspire 1: Flight times vary based on flight conditions, with a maximum 22 minute flight time being recorded when hovering with a TB48 battery using the Zenmuse XT gimbal camera.
*M100: Flight times vary based on payload and flight conditions, with a maximum 35 minute flight time being recorded when hovering with dual TB48D batteries and no additional payload other than a Zenmuse XT gimbal camera.
*M600: Flight time not available.
Additional information on the FLIR camera can be found in DJI Zenmuse XT Specifications.
A tutorial on capturing great thermal images can be found here.
Price: Select "Get Custom Package Quote" in Cart
This is a special order product - Please allow 7-10 days for shipment
Unlock the Possibility of Sight
Thermal imaging from the air has never been as easy as it is with the DJI Zenmuse XT. By combining DJI’s unrivaled expertise in gimbal technology and image transmission with the industry leading thermal imaging technology of FLIR, the Zenmuse XT is the ultimate solution for rapid and reliable aerial thermal imaging. Capture faster, with pinpoint precision, over large areas, then save them for analysis and reporting.
Note: The video below is for demonstration purposes only and may not represent actual product.
Integrated Thermal Camera
The camera on the DJI Zenmuse XT is developed by FLIR. It provides high-sensitivity (50mK) infrared scanning at 640/30 fps or 336/60 fps depending on the camera model. This sensitivity provides accurate temperature measurements ideal for analytics and telemetry. Both cameras are available with four lens options to meet different business needs. Stabilized and controlled by a custom DJI gimbal, it provides smooth, clear imagery and 360 degrees of seamless rotational movement.
FLIR+DJI=Powerful Airborne Solutions
DJI’s Zenmuse gimbal technology has become the industry standard among demanding aerial cinematographers, and everything that makes DJI’s aerial platforms world-class for cinematography also makes them the perfect platforms for aerial thermal imaging: they’re stable, easy to fly, and fully-integrated with apps.
When you get right down to it, the main purpose of any drone is to position a sensor in three-dimensional space; when that sensor is a FLIR thermal imager, you expand the possibilities for drone operators and thermal inspectors alike. Using FLIR thermal imaging from small drones brings new capabilities to dozens of applications like search and rescue, the inspection of power lines, cell towers, bridges, substations, and buildings, firefighting, precision agriculture, and natural resource and wildlife protection.
See the unseen. FLIR cameras reveal details invisible to the naked eye by making subtle differences in temperature visible. This new view on the world can reveal when equipment or buildings are damaged, the location of lost people and much more. Applications like:
Image Enhancement Software
Infra-red imagery requires optimization to ensure maximum definition for capturing information. The Zenmuse XT features a suite of image enhancements designed by FLIR including Digital Detail Enhancement™ (DDE); Smart Scene Optimization™ (SSO), which enhances extremes in bi-modal scenes; Active Contrast Enhancement™ (ACE) that adjusts scene contrast relative to its temperature difference; and Information Based HEQ™ (IBHEQ) which compresses complex image data to create the best quality image.
Fingertip Control
The Zenmuse XT can be controlled completely through the DJI GO app, providing a real-time, low latency view of what the camera sees, and instant access to core camera functions including:
Mission Ready
Mounted on the Inspire 1, the Zenmuse XT is ready to launch in seconds. Its seamless integration gives you access to important features like DJI’s powerful Lightbridge video transmission system, automated Point of Interest, Course and Home Lock, Follow Me, and the DJI SDK.
*Inspire 1: Flight times vary based on flight conditions, with a maximum 22 minute flight time being recorded when hovering with a TB48 battery using the Zenmuse XT gimbal camera.
*M100: Flight times vary based on payload and flight conditions, with a maximum 35 minute flight time being recorded when hovering with dual TB48D batteries and no additional payload other than a Zenmuse XT gimbal camera.
*M600: Flight time not available.
Additional information on the FLIR camera can be found in DJI Zenmuse XT Specifications.
A tutorial on capturing great thermal images can be found here.
Price: Select "Get Custom Package Quote" in Cart
This is a special order product - Please allow 7-10 days for shipment
Unlock the Possibility of Sight
Thermal imaging from the air has never been as easy as it is with the DJI Zenmuse XT. By combining DJI’s unrivaled expertise in gimbal technology and image transmission with the industry leading thermal imaging technology of FLIR, the Zenmuse XT is the ultimate solution for rapid and reliable aerial thermal imaging. Capture faster, with pinpoint precision, over large areas, then save them for analysis and reporting.
Note: The video below is for demonstration purposes only and may not represent actual product.
Integrated Thermal Camera
The camera on the DJI Zenmuse XT is developed by FLIR. It provides high-sensitivity (50mK) infrared scanning at 640/30 fps or 336/60 fps depending on the camera model. This sensitivity provides accurate temperature measurements ideal for analytics and telemetry. Both cameras are available with four lens options to meet different business needs. Stabilized and controlled by a custom DJI gimbal, it provides smooth, clear imagery and 360 degrees of seamless rotational movement.
FLIR+DJI=Powerful Airborne Solutions
DJI’s Zenmuse gimbal technology has become the industry standard among demanding aerial cinematographers, and everything that makes DJI’s aerial platforms world-class for cinematography also makes them the perfect platforms for aerial thermal imaging: they’re stable, easy to fly, and fully-integrated with apps.
When you get right down to it, the main purpose of any drone is to position a sensor in three-dimensional space; when that sensor is a FLIR thermal imager, you expand the possibilities for drone operators and thermal inspectors alike. Using FLIR thermal imaging from small drones brings new capabilities to dozens of applications like search and rescue, the inspection of power lines, cell towers, bridges, substations, and buildings, firefighting, precision agriculture, and natural resource and wildlife protection.
See the unseen. FLIR cameras reveal details invisible to the naked eye by making subtle differences in temperature visible. This new view on the world can reveal when equipment or buildings are damaged, the location of lost people and much more. Applications like:
Image Enhancement Software
Infra-red imagery requires optimization to ensure maximum definition for capturing information. The Zenmuse XT features a suite of image enhancements designed by FLIR including Digital Detail Enhancement™ (DDE); Smart Scene Optimization™ (SSO), which enhances extremes in bi-modal scenes; Active Contrast Enhancement™ (ACE) that adjusts scene contrast relative to its temperature difference; and Information Based HEQ™ (IBHEQ) which compresses complex image data to create the best quality image.
Fingertip Control
The Zenmuse XT can be controlled completely through the DJI GO app, providing a real-time, low latency view of what the camera sees, and instant access to core camera functions including:
Mission Ready
Mounted on the Inspire 1, the Zenmuse XT is ready to launch in seconds. Its seamless integration gives you access to important features like DJI’s powerful Lightbridge video transmission system, automated Point of Interest, Course and Home Lock, Follow Me, and the DJI SDK.
*Inspire 1: Flight times vary based on flight conditions, with a maximum 22 minute flight time being recorded when hovering with a TB48 battery using the Zenmuse XT gimbal camera.
*M100: Flight times vary based on payload and flight conditions, with a maximum 35 minute flight time being recorded when hovering with dual TB48D batteries and no additional payload other than a Zenmuse XT gimbal camera.
*M600: Flight time not available.
Additional information on the FLIR camera can be found in DJI Zenmuse XT Specifications.
A tutorial on capturing great thermal images can be found here.
Price: Select "Get Custom Package Quote" in Cart
This is a special order product - Please allow 7-10 days for shipment
Unlock the Possibility of Sight
Thermal imaging from the air has never been as easy as it is with the DJI Zenmuse XT. By combining DJI’s unrivaled expertise in gimbal technology and image transmission with the industry leading thermal imaging technology of FLIR, the Zenmuse XT is the ultimate solution for rapid and reliable aerial thermal imaging. Capture faster, with pinpoint precision, over large areas, then save them for analysis and reporting.
Note: The video below is for demonstration purposes only and may not represent actual product.
Integrated Thermal Camera
The camera on the DJI Zenmuse XT is developed by FLIR. It provides high-sensitivity (50mK) infrared scanning at 640/30 fps or 336/60 fps depending on the camera model. This sensitivity provides accurate temperature measurements ideal for analytics and telemetry. Both cameras are available with four lens options to meet different business needs. Stabilized and controlled by a custom DJI gimbal, it provides smooth, clear imagery and 360 degrees of seamless rotational movement.
FLIR+DJI=Powerful Airborne Solutions
DJI’s Zenmuse gimbal technology has become the industry standard among demanding aerial cinematographers, and everything that makes DJI’s aerial platforms world-class for cinematography also makes them the perfect platforms for aerial thermal imaging: they’re stable, easy to fly, and fully-integrated with apps.
When you get right down to it, the main purpose of any drone is to position a sensor in three-dimensional space; when that sensor is a FLIR thermal imager, you expand the possibilities for drone operators and thermal inspectors alike. Using FLIR thermal imaging from small drones brings new capabilities to dozens of applications like search and rescue, the inspection of power lines, cell towers, bridges, substations, and buildings, firefighting, precision agriculture, and natural resource and wildlife protection.
See the unseen. FLIR cameras reveal details invisible to the naked eye by making subtle differences in temperature visible. This new view on the world can reveal when equipment or buildings are damaged, the location of lost people and much more. Applications like:
Image Enhancement Software
Infra-red imagery requires optimization to ensure maximum definition for capturing information. The Zenmuse XT features a suite of image enhancements designed by FLIR including Digital Detail Enhancement™ (DDE); Smart Scene Optimization™ (SSO), which enhances extremes in bi-modal scenes; Active Contrast Enhancement™ (ACE) that adjusts scene contrast relative to its temperature difference; and Information Based HEQ™ (IBHEQ) which compresses complex image data to create the best quality image.
Fingertip Control
The Zenmuse XT can be controlled completely through the DJI GO app, providing a real-time, low latency view of what the camera sees, and instant access to core camera functions including:
Mission Ready
Mounted on the Inspire 1, the Zenmuse XT is ready to launch in seconds. Its seamless integration gives you access to important features like DJI’s powerful Lightbridge video transmission system, automated Point of Interest, Course and Home Lock, Follow Me, and the DJI SDK.
*Inspire 1: Flight times vary based on flight conditions, with a maximum 22 minute flight time being recorded when hovering with a TB48 battery using the Zenmuse XT gimbal camera.
*M100: Flight times vary based on payload and flight conditions, with a maximum 35 minute flight time being recorded when hovering with dual TB48D batteries and no additional payload other than a Zenmuse XT gimbal camera.
*M600: Flight time not available.
Additional information on the FLIR camera can be found in DJI Zenmuse XT Specifications.
A tutorial on capturing great thermal images can be found here.
Price: Select "Get Custom Package Quote" in Cart
This is a special order product - Please allow 7-10 days for shipment
Unlock the Possibility of Sight
Thermal imaging from the air has never been as easy as it is with the DJI Zenmuse XT. By combining DJI’s unrivaled expertise in gimbal technology and image transmission with the industry leading thermal imaging technology of FLIR, the Zenmuse XT is the ultimate solution for rapid and reliable aerial thermal imaging. Capture faster, with pinpoint precision, over large areas, then save them for analysis and reporting.
Note: The video below is for demonstration purposes only and may not represent actual product.
Integrated Thermal Camera
The camera on the DJI Zenmuse XT is developed by FLIR. It provides high-sensitivity (50mK) infrared scanning at 640/30 fps or 336/60 fps depending on the camera model. This sensitivity provides accurate temperature measurements ideal for analytics and telemetry. Both cameras are available with four lens options to meet different business needs. Stabilized and controlled by a custom DJI gimbal, it provides smooth, clear imagery and 360 degrees of seamless rotational movement.
FLIR+DJI=Powerful Airborne Solutions
DJI’s Zenmuse gimbal technology has become the industry standard among demanding aerial cinematographers, and everything that makes DJI’s aerial platforms world-class for cinematography also makes them the perfect platforms for aerial thermal imaging: they’re stable, easy to fly, and fully-integrated with apps.
When you get right down to it, the main purpose of any drone is to position a sensor in three-dimensional space; when that sensor is a FLIR thermal imager, you expand the possibilities for drone operators and thermal inspectors alike. Using FLIR thermal imaging from small drones brings new capabilities to dozens of applications like search and rescue, the inspection of power lines, cell towers, bridges, substations, and buildings, firefighting, precision agriculture, and natural resource and wildlife protection.
See the unseen. FLIR cameras reveal details invisible to the naked eye by making subtle differences in temperature visible. This new view on the world can reveal when equipment or buildings are damaged, the location of lost people and much more. Applications like:
Image Enhancement Software
Infra-red imagery requires optimization to ensure maximum definition for capturing information. The Zenmuse XT features a suite of image enhancements designed by FLIR including Digital Detail Enhancement™ (DDE); Smart Scene Optimization™ (SSO), which enhances extremes in bi-modal scenes; Active Contrast Enhancement™ (ACE) that adjusts scene contrast relative to its temperature difference; and Information Based HEQ™ (IBHEQ) which compresses complex image data to create the best quality image.
Fingertip Control
The Zenmuse XT can be controlled completely through the DJI GO app, providing a real-time, low latency view of what the camera sees, and instant access to core camera functions including:
Mission Ready
Mounted on the Inspire 1, the Zenmuse XT is ready to launch in seconds. Its seamless integration gives you access to important features like DJI’s powerful Lightbridge video transmission system, automated Point of Interest, Course and Home Lock, Follow Me, and the DJI SDK.
*Inspire 1: Flight times vary based on flight conditions, with a maximum 22 minute flight time being recorded when hovering with a TB48 battery using the Zenmuse XT gimbal camera.
*M100: Flight times vary based on payload and flight conditions, with a maximum 35 minute flight time being recorded when hovering with dual TB48D batteries and no additional payload other than a Zenmuse XT gimbal camera.
*M600: Flight time not available.
Additional information on the FLIR camera can be found in DJI Zenmuse XT Specifications.
A tutorial on capturing great thermal images can be found here.
Price: Select "Get Custom Package Quote" in Cart
This is a special order product - Please allow 7-10 days for shipment
Unlock the Possibility of Sight
Thermal imaging from the air has never been as easy as it is with the DJI Zenmuse XT. By combining DJI’s unrivaled expertise in gimbal technology and image transmission with the industry leading thermal imaging technology of FLIR, the Zenmuse XT is the ultimate solution for rapid and reliable aerial thermal imaging. Capture faster, with pinpoint precision, over large areas, then save them for analysis and reporting.
Note: The video below is for demonstration purposes only and may not represent actual product.
Integrated Thermal Camera
The camera on the DJI Zenmuse XT is developed by FLIR. It provides high-sensitivity (50mK) infrared scanning at 640/30 fps or 336/60 fps depending on the camera model. This sensitivity provides accurate temperature measurements ideal for analytics and telemetry. Both cameras are available with four lens options to meet different business needs. Stabilized and controlled by a custom DJI gimbal, it provides smooth, clear imagery and 360 degrees of seamless rotational movement.
FLIR+DJI=Powerful Airborne Solutions
DJI’s Zenmuse gimbal technology has become the industry standard among demanding aerial cinematographers, and everything that makes DJI’s aerial platforms world-class for cinematography also makes them the perfect platforms for aerial thermal imaging: they’re stable, easy to fly, and fully-integrated with apps.
When you get right down to it, the main purpose of any drone is to position a sensor in three-dimensional space; when that sensor is a FLIR thermal imager, you expand the possibilities for drone operators and thermal inspectors alike. Using FLIR thermal imaging from small drones brings new capabilities to dozens of applications like search and rescue, the inspection of power lines, cell towers, bridges, substations, and buildings, firefighting, precision agriculture, and natural resource and wildlife protection.
See the unseen. FLIR cameras reveal details invisible to the naked eye by making subtle differences in temperature visible. This new view on the world can reveal when equipment or buildings are damaged, the location of lost people and much more. Applications like:
Image Enhancement Software
Infra-red imagery requires optimization to ensure maximum definition for capturing information. The Zenmuse XT features a suite of image enhancements designed by FLIR including Digital Detail Enhancement™ (DDE); Smart Scene Optimization™ (SSO), which enhances extremes in bi-modal scenes; Active Contrast Enhancement™ (ACE) that adjusts scene contrast relative to its temperature difference; and Information Based HEQ™ (IBHEQ) which compresses complex image data to create the best quality image.
Fingertip Control
The Zenmuse XT can be controlled completely through the DJI GO app, providing a real-time, low latency view of what the camera sees, and instant access to core camera functions including:
Mission Ready
Mounted on the Inspire 1, the Zenmuse XT is ready to launch in seconds. Its seamless integration gives you access to important features like DJI’s powerful Lightbridge video transmission system, automated Point of Interest, Course and Home Lock, Follow Me, and the DJI SDK.
*Inspire 1: Flight times vary based on flight conditions, with a maximum 22 minute flight time being recorded when hovering with a TB48 battery using the Zenmuse XT gimbal camera.
*M100: Flight times vary based on payload and flight conditions, with a maximum 35 minute flight time being recorded when hovering with dual TB48D batteries and no additional payload other than a Zenmuse XT gimbal camera.
*M600: Flight time not available.
Additional information on the FLIR camera can be found in DJI Zenmuse XT Specifications.
A tutorial on capturing great thermal images can be found here.
Price: Select "Get Custom Package Quote" in Cart
This is a special order product - Please allow 7-10 days for shipment
DJI FLIR Zenmuse XT2 is the next generation of commercial drone solutions that combines RGB and thermogram solutions into a single package. Pairing the FLIR Tau 2 thermal sensor and 4K visual camera with DJI's leading stabilization and machine intelligence technology, the XT2 quickly transforms aerial data into powerful insights that save time, money, and lives.
Note: The video below is for demonstration purposes only and may not represent actual product.
Robust Dual-Sensor Thermal Solution
Protected within a weather resistant encasing is a combination of FLIR's advanced radiometric thermal sensor and 4K visual sensor. Capable of integrating seamlessly with DJI's powerful enterprise drone platforms.
Transform Data into Insights in Real-Time
Enabled by a suite of processors and computer vision algorithms, the DJI FLIR Zenmuse XT2 onboard machine intelligence allows you to determine what’s important during operation in real-time.
Applications
See the unseen. FLIR thermal sensors reveal details that are invisible to the naked eye by making subtle differences in temperature visible. This new view on the world can reveal equipment or structural damages, the location of various thermal signatures of interest, and much more. It's the ideal equipment for firefighting, solar panel inspections, HazMat operations, power line inspections, agriculture, roof inspections, and search operations.
Ready for Action
The DJI FLIR Zenmuse XT2 thermal camera is compatible with the M200 Series and M600 Pro drones. The Zenmuse XT2 easily and securely mounts onto DJI’s industry-leading M200 Series and M600 Pro UAV platforms. When the XT2 is mounted onto a M200, M210, or the M210 RTK drone, pilots have a combined solution that extends the operation window for drone technology, allowing pilots to fly confidently in low-light operations, through windy environments, or in light rain conditions. Utilizing the M210, or M210 RTK UAV platform, pilots can build more robust drone solutions around the XT2 over time by adding zoom cameras, additional onboard computers and other payloads to fit a variety of specialized missions.
Purpose-Built Application
The DJI Pilot is a professional grade flight control Android app that is developed specifically for enterprise-users to unleash the power of their DJI drones. With development made specifically for the FLIR Zenmuse XT2, DJI Pilot optimizes your flight and aerial imaging process.
A tutorial on how to use the Zenmuse XT2 thermal camera can be found here.
A tutorial on capturing great thermal images can be found here.
Price: Select "Get Custom Package Quote" in Cart
This is a special order product - Please allow 7-10 days for shipment
DJI FLIR Zenmuse XT2 is the next generation of commercial drone solutions that combines RGB and thermogram solutions into a single package. Pairing the FLIR Tau 2 thermal sensor and 4K visual camera with DJI's leading stabilization and machine intelligence technology, the XT2 quickly transforms aerial data into powerful insights that save time, money, and lives.
Note: The video below is for demonstration purposes only and may not represent actual product.
Robust Dual-Sensor Thermal Solution
Protected within a weather resistant encasing is a combination of FLIR's advanced radiometric thermal sensor and 4K visual sensor. Capable of integrating seamlessly with DJI's powerful enterprise drone platforms.
Transform Data into Insights in Real-Time
Enabled by a suite of processors and computer vision algorithms, the DJI FLIR Zenmuse XT2 onboard machine intelligence allows you to determine what’s important during operation in real-time.
Applications
See the unseen. FLIR thermal sensors reveal details that are invisible to the naked eye by making subtle differences in temperature visible. This new view on the world can reveal equipment or structural damages, the location of various thermal signatures of interest, and much more. It's the ideal equipment for firefighting, solar panel inspections, HazMat operations, power line inspections, agriculture, roof inspections, and search operations.
Ready for Action
The DJI FLIR Zenmuse XT2 thermal camera is compatible with the M200 Series and M600 Pro drones. The Zenmuse XT2 easily and securely mounts onto DJI’s industry-leading M200 Series and M600 Pro UAV platforms. When the XT2 is mounted onto a M200, M210, or the M210 RTK drone, pilots have a combined solution that extends the operation window for drone technology, allowing pilots to fly confidently in low-light operations, through windy environments, or in light rain conditions. Utilizing the M210, or M210 RTK UAV platform, pilots can build more robust drone solutions around the XT2 over time by adding zoom cameras, additional onboard computers and other payloads to fit a variety of specialized missions.
Purpose-Built Application
The DJI Pilot is a professional grade flight control Android app that is developed specifically for enterprise-users to unleash the power of their DJI drones. With development made specifically for the FLIR Zenmuse XT2, DJI Pilot optimizes your flight and aerial imaging process.
A tutorial on how to use the Zenmuse XT2 thermal camera can be found here.
A tutorial on capturing great thermal images can be found here.
Price: Select "Get Custom Package Quote" in Cart
This is a special order product - Please allow 7-10 days for shipment
DJI FLIR Zenmuse XT2 is the next generation of commercial drone solutions that combines RGB and thermogram solutions into a single package. Pairing the FLIR Tau 2 thermal sensor and 4K visual camera with DJI's leading stabilization and machine intelligence technology, the XT2 quickly transforms aerial data into powerful insights that save time, money, and lives.
Note: The video below is for demonstration purposes only and may not represent actual product.
Robust Dual-Sensor Thermal Solution
Protected within a weather resistant encasing is a combination of FLIR's advanced radiometric thermal sensor and 4K visual sensor. Capable of integrating seamlessly with DJI's powerful enterprise drone platforms.
Transform Data into Insights in Real-Time
Enabled by a suite of processors and computer vision algorithms, the DJI FLIR Zenmuse XT2 onboard machine intelligence allows you to determine what’s important during operation in real-time.
Applications
See the unseen. FLIR thermal sensors reveal details that are invisible to the naked eye by making subtle differences in temperature visible. This new view on the world can reveal equipment or structural damages, the location of various thermal signatures of interest, and much more. It's the ideal equipment for firefighting, solar panel inspections, HazMat operations, power line inspections, agriculture, roof inspections, and search operations.
Ready for Action
The DJI FLIR Zenmuse XT2 thermal camera is compatible with the M200 Series and M600 Pro drones. The Zenmuse XT2 easily and securely mounts onto DJI’s industry-leading M200 Series and M600 Pro UAV platforms. When the XT2 is mounted onto a M200, M210, or the M210 RTK drone, pilots have a combined solution that extends the operation window for drone technology, allowing pilots to fly confidently in low-light operations, through windy environments, or in light rain conditions. Utilizing the M210, or M210 RTK UAV platform, pilots can build more robust drone solutions around the XT2 over time by adding zoom cameras, additional onboard computers and other payloads to fit a variety of specialized missions.
Purpose-Built Application
The DJI Pilot is a professional grade flight control Android app that is developed specifically for enterprise-users to unleash the power of their DJI drones. With development made specifically for the FLIR Zenmuse XT2, DJI Pilot optimizes your flight and aerial imaging process.
A tutorial on how to use the Zenmuse XT2 thermal camera can be found here.
A tutorial on capturing great thermal images can be found here.
Price: Select "Get Custom Package Quote" in Cart
This is a special order product - Please allow 7-10 days for shipment
DJI FLIR Zenmuse XT2 is the next generation of commercial drone solutions that combines RGB and thermogram solutions into a single package. Pairing the FLIR Tau 2 thermal sensor and 4K visual camera with DJI's leading stabilization and machine intelligence technology, the XT2 quickly transforms aerial data into powerful insights that save time, money, and lives.
Note: The video below is for demonstration purposes only and may not represent actual product.
Robust Dual-Sensor Thermal Solution
Protected within a weather resistant encasing is a combination of FLIR's advanced radiometric thermal sensor and 4K visual sensor. Capable of integrating seamlessly with DJI's powerful enterprise drone platforms.
Transform Data into Insights in Real-Time
Enabled by a suite of processors and computer vision algorithms, the DJI FLIR Zenmuse XT2 onboard machine intelligence allows you to determine what’s important during operation in real-time.
Applications
See the unseen. FLIR thermal sensors reveal details that are invisible to the naked eye by making subtle differences in temperature visible. This new view on the world can reveal equipment or structural damages, the location of various thermal signatures of interest, and much more. It's the ideal equipment for firefighting, solar panel inspections, HazMat operations, power line inspections, agriculture, roof inspections, and search operations.
Ready for Action
The DJI FLIR Zenmuse XT2 thermal camera is compatible with the M200 Series and M600 Pro drones. The Zenmuse XT2 easily and securely mounts onto DJI’s industry-leading M200 Series and M600 Pro UAV platforms. When the XT2 is mounted onto a M200, M210, or the M210 RTK drone, pilots have a combined solution that extends the operation window for drone technology, allowing pilots to fly confidently in low-light operations, through windy environments, or in light rain conditions. Utilizing the M210, or M210 RTK UAV platform, pilots can build more robust drone solutions around the XT2 over time by adding zoom cameras, additional onboard computers and other payloads to fit a variety of specialized missions.
Purpose-Built Application
The DJI Pilot is a professional grade flight control Android app that is developed specifically for enterprise-users to unleash the power of their DJI drones. With development made specifically for the FLIR Zenmuse XT2, DJI Pilot optimizes your flight and aerial imaging process.
A tutorial on how to use the Zenmuse XT2 thermal camera can be found here.
A tutorial on capturing great thermal images can be found here.
$69.00
The Inspire 2 180W Power Adaptor charges the Inspire 2 transmitter (remote controller) and battery using AC power. When charging the Intelligent Flight Battery, the Inspire 2 Intelligent Flight Battery Charging Hub is required. It takes approximately 1.5 hours to fully charge an Inspire 2 Intelligent Flight Battery or 2.5 hours to charge an Inspire 2 transmitter. When charging both devices together, charging may take longer than 2.5 hours.
Note: 180W AC cable can be purchased separately here.
$109.00
The Car Charger for Inspire 2 is used to charge the Intelligent Flight Battery or remote controller through a car’s cigarette lighter port. When charging the Intelligent Flight Battery, the Inspire 2 Intelligent Flight Battery Charging Hub is required. It comes with low-voltage protection and overheating protection which automatically cut off charging if the source battery voltage is too low or the cigarette lighter port exceeds a certain temperature.
SPECIFICATIONS
Product Model: C6S90-2
Operating Temperature: 32° to 104° F (0° to 40° C)
DC Input: 12.3-16 V (Sedan) ; 25-30 V (Coach)
DC Output: 26.1 V; 3.45 A; 90 W
Charge Time*:
Two Batteries: Approx. 2 hr 30 min
Four Batteries: Approx. 5 hours
Remote Controller: Approx. 3 hr 40 min
* The charge time was tested in a lab environment at room temperature and should be taken as reference only.
Subscribe to our newsletter and always be the first to hear about what is happening.
© 2018 The Drone Pro Shop.
