Below are some questions and answers that you may find helpful as you consider purchasing the DJI Inspire 1. Please feel free to contact us if you have additional questions.
The two remote controllers are physically identical. You can set the remote controllers to either "Master" or "Slave" through the DJI GO app if you wish to use dual controller mode.
Yes.
Its length x height x width dimensions without the propellers attached are 44 x 30 x 45cm (17.3 x 11.8 x 17.7in).
The Inspire 1 uses its own new flight controller.
The Inspire 1 uses 3510H motors and 1345T propellers.
The Inspire 1 comes with a 16GB micro-SD card. It supports SD cards up to 64GB.
The Inspire 1 does not currently support GoPro attachments. The gimbal is designed to hold DJI cameras only.
The exposure can be set to Auto, for automatic changes, or Manual, if you wish to use a specific setting.
We do not recommend flying with any payload other than the included DJI gimbal and camera.
Yes, you can preview image or video sizes through the DJI GO app.
No, DJI does not sell LCD or HD monitors for the Inspire 1. However, you can output the live streaming video to a compatible monitor or mobile device of your own.
Yes, all Inspire 1 units come with standard TB47 charger.
With the standard TB47 100W charger, it takes 85min to fully charge a 4500mAh battery.
No, it cannot. The mobile device holder can only be used with the Inspire 1 remote.
There is no trainer port on the remote controller for the Inspire 1.
The Inspire 1 does not currently support ground station.
The two remote controllers are physically identical. You can set the remote controllers to either "Master" or "Slave" through the DJI GO app if you wish to use dual controller mode.
Yes.
Its length x height x width dimensions without the propellers attached are 44 x 30 x 45cm (17.3 x 11.8 x 17.7in).
The Inspire 1 uses its own new flight controller.
The Inspire 1 uses 3510H motors and 1345T propellers.
The Inspire 1 comes with a 16GB micro-SD card. It supports SD cards up to 64GB.
The Inspire 1 does not currently support GoPro attachments. The gimbal is designed to hold DJI cameras only.
The exposure can be set to Auto, for automatic changes, or Manual, if you wish to use a specific setting.
We do not recommend flying with any payload other than the included DJI gimbal and camera.
Yes, you can preview image or video sizes through the DJI GO app.
No, DJI does not sell LCD or HD monitors for the Inspire 1. However, you can output the live streaming video to a compatible monitor or mobile device of your own.
Yes, all Inspire 1 units come with standard TB47 charger.
With the standard TB47 100W charger, it takes 85min to fully charge a 4500mAh battery.
No, it cannot. The mobile device holder can only be used with the Inspire 1 remote.
There is no trainer port on the remote controller for the Inspire 1.
The Inspire 1 does not currently support ground station.