Durable SKB military spec case used by the military and industry leaders
Four wide set in-line skate style wheels for easy transport
Waterproof and dust tight design
Ambient pressure equalization valve
Resistant to UV, solvents, corrosion, fungus
Resistant to impact damage
Manufacturer's lifetime replacement guarantee
Note: Requires about 2 weeks to ship
The DJI Inspire 2 Travel Mode Case maximizes efficiency by reducing setup time, and protects your Inspire 2 and accessories in a safe, waterproof environment. Will accommodate 4 flights worth of batteries. Other features include:
Water-jet precision cut foam
Industrial strength injection molded pull handle
Padlock holes include stainless steel padlock protector clips
Molded-in hinge for added protection
Trigger release latch system
Snap-down rubber over-molded cushion grip handle
External Dimensions (in.): 24.81 Long x 24.98 Wide x 14.15 Deep
DJI Cendence remote controller for the Inspire 2 and the Matrice 200 Series drones.
Improved Control Efficiency: Five analog control channels and over ten customizable buttons.
Interchange Antenna: Use high-gain antenna or DJI Tracktenna to augment the power of DJI Lightbridge technology, significantly reducing interference while increasing image quality.
Multiple Interface Ports: HDMI, SDI, USB, and CAN ports provide robust expansion capabilities.
Dust Resistant: Control Stick Covers prevent dust from entering both sticks, ensuring smooth and reliable control.
Flexibility: Although fully compatible with CrystalSky monitors, the Interchangeable Mobile Device Holder lets you attach a phone or tablet instead of a CrystalSky monitor.
DIALS, LEVERS, and KNOBS The two knobs on the front panel control gimbal pitch and yaw, and the right/left levers and Focus Adjustment Knob are used to tune flight controller settings and the gimbal camera in real-time, allowing the operator to focus and set aperture.
CAMERA SETTINGS For quick camera adjustments, the operator can customize several shortcut buttons for particular groups of settings, or save frequently used settings.
CUSTOM CONTROL Customizable buttons can quickly enable or disable frequently used functions like focus peaking, color waveform, obstacle avoidance, and home point resetting; or close warnings and tips midflight, all without using an app.
BUTTON COMBINATIONS Rotate the dials or the toggle the right/left levers while holding applicable buttons to control gimbal roll, shutter speed, aperture, or ISO.
DETACHABLE DESIGN, CRYSTALSKY COMPATIBILITY The CrystalSky monitor mounts to the Cendence remote controller via the Cendence Monitor Mounting Bracket.
The Cendence remote controller’s antennas, PCB, mounting bracket, and battery are all detachable, making its hardware easily upgradable, allowing you to customize the controller for compatibility with future DJI aircraft.
DUAL OPERATOR CONTROL When precision camera control is required, the Cendence remote controller can connect as either a master or slave controller with the Inspire 2’s remote controller or another Cendence remote controller.
MULTIPLE PORTS
SDI and HDMI ports support broadcasting at 1080i50 and 720p60.
Connect DJI Focus, Tracktenna, or other compatible accessories via the CAN port. Use Tracktenna to achieve stable and high-bandwidth transmission over long distances at 2.4 GHz or 5.8 GHz frequency bands. When used with the Inspire 2, Tracktenna can achieve a maximum data transmission speed of 10 Mbps within 1.24 mi (2 km), dramatically improving video downlink quality.
The USBA port supports connecting with other mobile devices
BATTERY SYSTEM Cendence uses a detachable battery that operates for up to four hours. If you run out of power, just swap in a charged battery or charge Cendence via the power port. Cendence uses the same batteries as CrystalSky monitors, reducing accessories.
The control stick covers protect your equipment by preventing dust from entering the remote controller through the moving surfaces at the base of the control sticks. The elastomeric bellow design maintains smooth and reliable movement of the control sticks.
Mobile devices can be mounted to the Cendence Remote Controller via the Cendence Mobile Device Holder. Devices up to 170mm wide are supported. Compatible devices include the Apple iPhone and iPad.
Note: Refer to Cendence remote controller specifications for full device compatibility details.
DJI CINESSD uses an NVMe logical device interface specification, features four PCI Express 3.0 ports and supports FAT32/exFAT file formats. The 480GB CINESSD can record videos at write speeds of up to 4.2Gbps, providing enough data to meet demanding filmmaking needs.
Estimated Recording time:
License Key
Video Format
Resolution
Bit
Frame Rate / fps
Recording Duration*
CinemaDNG
License Key
CinemaDNG
5280x2970
12
23.976 / 24 / 25 / 29.97
15Min
@29.97fps
4096x2160
10
50 / 59.94
17Min
@59.94fps
4096x2160
12
23.976 / 24 / 25 / 29.97
30Min
@29.97fps
4096x2160
12
47.952
19Min
@47.952fps
3840x2160
10
50 / 59.94
18Min
@59.94fps
3840x2160
12
23.976 / 24 / 25 / 29.97
31Min
@29.97fps
3840x2160
12
47.952
20Min
@47.952fps
Apple ProRes
License Key
Apple ProRes
422HQ
3840x2160
/
23.976 / 24 / 25 / 29.97
71Min
@29.97fps
5280 x 2160
/
23.976 / 24 / 25 / 29.97
51Min
@29.97fps
Apple ProRes
4444XQ (no alpha)
3840 x 2160
/
23.976 / 24 / 25 / 29.97
32Min
@29.97fps
* Calculated by average bitrate, actual recording duration may vary
Created for outdoor aerial imaging, the CrystalSky monitor features an ultra-bright screen that is clearly visible in sunlight. It is designed from the ground up to work seamlessly with the DJI GO/DJI GO 4 app, giving camera operators total control.
SMOOTHER VIDEO DISPLAY The CrystalSky monitor uses optimized video decoding to decode video in real-time. Due to limitations in software access on smartphones and tablets, video decoding in other smart devices is less than ideal. When used to view photos or videos transmitted by the camera, problems can occur including video jitter, long latency and more. The CrystalSky monitor’s optimized decoder provides smooth, real-time video with minimal latency.
CUSTOMIZED SYSTEM AND DJI GO/DJI GO 4 A newly designed system removes unnecessary Android apps and services and is resistant to viruses and junk software. This ensures that the CrystalSky monitor is able to offer optimum performance at all times. Its embedded DJI GO/DJI GO 4 app provides full access to all DJI GO/DJI GO 4 features including aircraft parameter adjustment, camera control, footage management, and playback. Using offline maps, maps can be kept available even if going out of Wi-Fi reach.
POWER SUPPLY A two cell 4920 mAh secondary external battery gives the CrystalSky monitor a longer operating time than comparable mobile devices. It supports quick charge, and controls its discharge rate well even in low temperatures. Used with the 7.85" and 5.5" screens, it can achieve a maximum operation time of 4-5 hours and 5-6 hours respectively.
DUAL SD CARD SLOTS Equipped with dual Micro SD Card slots, the CrystalSky monitor’s storage can be extended, or footage recorded on a Micro SD Card can be played back directly on the monitor. It can also be used for footage backups. Using editors built in DJI GO/DJI GO 4, high-quality edits can be made quickly and instantly shared to social media.
The CrystalSky monitor supports H.264 and H.265 video decoding, allowing it to play back these files at 30 fps and 60 fps respectively. These videos can also be output through its HDMI port.
PORTS AND NETWORK The CrystalSky monitor’s HDMI port allows up to 4K video to be output to FPV goggles and other display devices. Built-in dual band Wi-Fi means it can connect to Wi-Fi networks and Wi-Fi hotspots from mobile devices, and it is also compatible with 4G dongles and USB storage through its USB-A port.
When connected to the internet, the CrystalSky monitor gets easy access to system upgrades, livestreaming, photo or video sharing, data synchronization and more. File sizes are optimized as much as possible to minimize mobile data demands.
Onboard Micro USB and USB-C ports make it convenient to connect the CrystalSky monitor with a remote controller or other devices.
EXTREME TEMPERATURE OPTIMIZED Most smart devices are designed to operate in common temperature ranges. The CrystalSky monitor's external battery has been designed for more extreme temperatures. It is able to operate in as low as -4°F (-20°C) and, with its internal cooling system, functions normally in temperatures as high as 104°F (40°C).
DJI AERIAL SYSTEM COMPATIBILITY The CrystalSky monitor can quickly connect to the Inspire series, Phantom 4 series, Phantom 3 series (Phantom 3 Professional, Phantom 3 Advanced), Matrice series, and Osmo series (except the Osmo Mobile) over Wi-Fi or via a remote controller USB port, depending on your specific product.* Also, CrystalSky easily attaches to the Cendence remote controller without an additional mounting bracket.
IN THE BOX CrystalSky Monitor ×1 Intelligent Battery ×1 Intelligent Battery Charging Hub ×1
Created for outdoor aerial imaging, the CrystalSky monitor features an ultra-bright screen that is clearly visible in sunlight. It is designed from the ground up to work seamlessly with the DJI GO/DJI GO 4 app, giving camera operators total control.
SMOOTHER VIDEO DISPLAY The CrystalSky monitor uses optimized video decoding to decode video in real-time. Due to limitations in software access on smartphones and tablets, video decoding in other smart devices is less than ideal. When used to view photos or videos transmitted by the camera, problems can occur including video jitter, long latency and more. The CrystalSky monitor’s optimized decoder provides smooth, real-time video with minimal latency.
CUSTOMIZED SYSTEM AND DJI GO/DJI GO 4 A newly designed system removes unnecessary Android apps and services and is resistant to viruses and junk software. This ensures that the CrystalSky monitor is able to offer optimum performance at all times. Its embedded DJI GO/DJI GO 4 app provides full access to all DJI GO/DJI GO 4 features including aircraft parameter adjustment, camera control, footage management, and playback. Using offline maps, maps can be kept available even if going out of Wi-Fi reach.
POWER SUPPLY A two cell 4920 mAh secondary external battery gives the CrystalSky monitor a longer operating time than comparable mobile devices. It supports quick charge, and controls its discharge rate well even in low temperatures. Used with the 7.85" and 5.5" screens, it can achieve a maximum operation time of 4-5 hours and 5-6 hours respectively.
DUAL SD CARD SLOTS Equipped with dual Micro SD Card slots, the CrystalSky monitor’s storage can be extended, or footage recorded on a Micro SD Card can be played back directly on the monitor. It can also be used for footage backups. Using editors built in DJI GO/DJI GO 4, high-quality edits can be made quickly and instantly shared to social media.
The CrystalSky monitor supports H.264 and H.265 video decoding, allowing it to play back these files at 30 fps and 60 fps respectively. These videos can also be output through its HDMI port.
PORTS AND NETWORK The CrystalSky monitor’s HDMI port allows up to 4K video to be output to FPV goggles and other display devices. Built-in dual band Wi-Fi means it can connect to Wi-Fi networks and Wi-Fi hotspots from mobile devices, and it is also compatible with 4G dongles and USB storage through its USB-A port.
When connected to the internet, the CrystalSky monitor gets easy access to system upgrades, livestreaming, photo or video sharing, data synchronization and more. File sizes are optimized as much as possible to minimize mobile data demands.
Onboard Micro USB and USB-C ports make it convenient to connect the CrystalSky monitor with a remote controller or other devices.
EXTREME TEMPERATURE OPTIMIZED Most smart devices are designed to operate in common temperature ranges. The CrystalSky monitor's external battery has been designed for more extreme temperatures. It is able to operate in as low as -4°F (-20°C) and, with its internal cooling system, functions normally in temperatures as high as 104°F (40°C).
DJI AERIAL SYSTEM COMPATIBILITY The CrystalSky monitor can quickly connect to the Inspire series, Phantom 4 series, Phantom 3 series (Phantom 3 Professional, Phantom 3 Advanced), Matrice series, and Osmo series (except the Osmo Mobile) over Wi-Fi or via a remote controller USB port, depending on your specific product.* Also, CrystalSky easily attaches to the Cendence remote controller without an additional mounting bracket.
IN THE BOX CrystalSky Monitor ×1 Intelligent Battery ×1 Intelligent Battery Charging Hub ×1
Created for outdoor aerial imaging, the CrystalSky monitor features an ultra-bright screen that is clearly visible in sunlight. It is designed from the ground up to work seamlessly with the DJI GO/DJI GO 4 app, giving camera operators total control.
SMOOTHER VIDEO DISPLAY The CrystalSky monitor uses optimized video decoding to decode video in real-time. Due to limitations in software access on smartphones and tablets, video decoding in other smart devices is less than ideal. When used to view photos or videos transmitted by the camera, problems can occur including video jitter, long latency and more. The CrystalSky monitor’s optimized decoder provides smooth, real-time video with minimal latency.
CUSTOMIZED SYSTEM AND DJI GO/DJI GO 4 A newly designed system removes unnecessary Android apps and services and is resistant to viruses and junk software. This ensures that the CrystalSky monitor is able to offer optimum performance at all times. Its embedded DJI GO/DJI GO 4 app provides full access to all DJI GO/DJI GO 4 features including aircraft parameter adjustment, camera control, footage management, and playback. Using offline maps, maps can be kept available even if going out of Wi-Fi reach.
POWER SUPPLY A two cell 4920 mAh secondary external battery gives the CrystalSky monitor a longer operating time than comparable mobile devices. It supports quick charge, and controls its discharge rate well even in low temperatures. Used with the 7.85" and 5.5" screens, it can achieve a maximum operation time of 4-5 hours and 5-6 hours respectively.
DUAL SD CARD SLOTS Equipped with dual Micro SD Card slots, the CrystalSky monitor’s storage can be extended, or footage recorded on a Micro SD Card can be played back directly on the monitor. It can also be used for footage backups. Using editors built in DJI GO/DJI GO 4, high-quality edits can be made quickly and instantly shared to social media.
The CrystalSky monitor supports H.264 and H.265 video decoding, allowing it to play back these files at 30 fps and 60 fps respectively. These videos can also be output through its HDMI port.
PORTS AND NETWORK The CrystalSky monitor’s HDMI port allows up to 4K video to be output to FPV goggles and other display devices. Built-in dual band Wi-Fi means it can connect to Wi-Fi networks and Wi-Fi hotspots from mobile devices, and it is also compatible with 4G dongles and USB storage through its USB-A port.
When connected to the internet, the CrystalSky monitor gets easy access to system upgrades, livestreaming, photo or video sharing, data synchronization and more. File sizes are optimized as much as possible to minimize mobile data demands.
Onboard Micro USB and USB-C ports make it convenient to connect the CrystalSky monitor with a remote controller or other devices.
EXTREME TEMPERATURE OPTIMIZED Most smart devices are designed to operate in common temperature ranges. The CrystalSky monitor's external battery has been designed for more extreme temperatures. It is able to operate in as low as -4°F (-20°C) and, with its internal cooling system, functions normally in temperatures as high as 104°F (40°C).
DJI AERIAL SYSTEM COMPATIBILITY The CrystalSky monitor can quickly connect to the Inspire series, Phantom 4 series, Phantom 3 series (Phantom 3 Professional, Phantom 3 Advanced), Matrice series, and Osmo series (except the Osmo Mobile) over Wi-Fi or via a remote controller USB port, depending on your specific product.* Also, CrystalSky easily attaches to the Cendence remote controller without an additional mounting bracket.
IN THE BOX CrystalSky Monitor ×1 Intelligent Battery ×1 Intelligent Battery Charging Hub ×1
The Inspire 2 180W Power Adaptor charges the Inspire 2 transmitter (remote controller) and battery using AC power. When charging the Intelligent Flight Battery, the Inspire 2 Intelligent Flight Battery Charging Hub is required. It takes approximately 1.5 hours to fully charge an Inspire 2 Intelligent Flight Battery or 2.5 hours to charge an Inspire 2 transmitter. When charging both devices together, charging may take longer than 2.5 hours.
Note: 180W AC cable can be purchased separately here.
The Car Charger for Inspire 2 is used to charge the Intelligent Flight Battery or remote controller through a car’s cigarette lighter port. When charging the Intelligent Flight Battery, the Inspire 2 Intelligent Flight Battery Charging Hub is required. It comes with low-voltage protection and overheating protection which automatically cut off charging if the source battery voltage is too low or the cigarette lighter port exceeds a certain temperature.
SPECIFICATIONS Product Model: C6S90-2 Operating Temperature: 32° to 104° F (0° to 40° C) DC Input: 12.3-16 V (Sedan) ; 25-30 V (Coach) DC Output: 26.1 V; 3.45 A; 90 W Charge Time*: Two Batteries: Approx. 2 hr 30 min Four Batteries: Approx. 5 hours Remote Controller: Approx. 3 hr 40 min
* The charge time was tested in a lab environment at room temperature and should be taken as reference only.
Provides the Inspire 2 transmitter (remote controller) with accurate positioning coordinates, enabling the use of dynamic home points and offering remote controller positioning information during ActiveTrack.
Charge 4 Inspre 2 TB50 battery, or M200 Series TB50 and TB55 batteries at the same time
The Inspire 2 Intelligent Flight Battery Charging Hub is designed for use with the Inspire 2 Battery Charger. It charges up to four Intelligent Flight Batteries simultaneously. The battery pair* with more stored power will be charged first. The Charging Hub will intelligently charge batteries in sequence according to battery power levels from high to low, if batteries are not paired. Pairing can be carried out using the DJI GO app. The Micro USB port is used for firmware updates.
* Visit the Official DJI website and download the Inspire 2 User Manual for more information on how to pair batteries using the DJI GO app.
DJI Inspire 2 Remote Controller CAN Bus Cable for DJI Focus
$39.00
Used to connect the communication port on the DJI Focus remote controller to the CAN-Bus port on the Inspire 2 transmitter. This enables the Focus remote controller to control the focus of the Zenmuse X5S.
Large storage space for up to 12 TB50 Intelligent Batteries, two CrystalSky/Cendence Intelligent Batteries and one CrystalSky/Cendence Battery Charging Hub.
Charge up to 8 TB50 batteries simultaneously. Multiple ports let you also charge the Inspire 2 remote controller, CrystalSky/Cendence Intelligent Battery, and a mobile device.
A built-in cooling fan and automatic safety features ensures every battery stays within a safe temperature range.
Wheels and a telescopic handle make the Battery Station convenient for travel.
The DJI Inspire 2 TB50 Battery Charging Station is a battery station built specifically for the TB50 Intelligent Battery. The DJI Battery Station is the all-in-one solution for charging, storing, and transporting your TB50 batteries and accessories, helping professionals to efficiently manage batteries and accessories for any project.
Comprehensive Charging With efficient and intelligent management, the DJI Battery Station ensures that your equipment is always ready to use. The Battery Station can charge up to eight TB50 Intelligent Batteries simultaneously. In addition, it can charge other devices, including the Inspire 2 remote controller and the CrystalSky/Cendence Intelligent Battery via multiple charging ports. Even other mobile devices can be charged using the USB ports. Simply put, the DJI Battery Station is equipped to meet the needs of all your energy-dependent devices.
In addition to power, the DJI Battery Station provides vital information about your batteries to ensure proper management. When a TB50 Intelligent Battery is attached, its current firmware version will display on the station's LCD screen. When connected to a computer via USB cable, the Battery Station can update up to eight batteries to their latest firmware version through DJI Assistant 2 on the computer*.
The DJI Battery Station is built within a case that offers maximum storage. It can store up to twelve TB50 Intelligent Batteries, two CrystalSky/Cendence Intelligent Batteries, and one CrystalSky/Cendence Battery Charging Hub. Outfitted with wheels and a telescoping handle for traveling, the Battery Station is extremely portable.
*Compatibility available soon. A software upgrade will be required.
Multiple Charging Modes The DJI Inspire 2 TB50 Battery Charging Station uses three charging modes to provide the best power management for every scenario: Normal, Quick, and Silent.
Normal mode: Eight TB50 Intelligent Batteries can be charged simultaneously until all batteries are fully charged.
Quick mode: Four TB50 Intelligent Batteries with the highest battery level in the same group will be charged to 90% in just 35 minutes, making it a useful option for urgent use.
Silent mode: Charging speed is lowered to provide a quieter process for evening charges or when noise level needs to be low.
Intelligent and Simple Discharging The DJI Battery Station also comes with features to maintain battery quality. Discharge mode will bring batteries to 25% for transportation and 50% for storage. This intelligent and easy-to-use discharging feature makes battery maintenance simple and lengthens the life of your batteries.
Safe and Reliable Safety is a top priority when handling batteries, which is why the DJI Battery Charging Station is designed with robust features to ensure reliable charging and storing of all your batteries.
A built-in cooling fan dissipates heat during charging. A temperature detection system monitors battery temperature in real time to make sure that every battery stays within a safe operating temperature range. If overheating is detected, the Battery Station will automatically cancel charging and discharging to avoid any safety hazards.
The DJI Inspire 2 TB50 Battery Charging Station is constructed of engineered plastic material that meets UL94 V-0 flammability standards, reducing the safety risks that may arise in extreme environments.
The latest update to DJI Lightbridge technology has an effective transmission distance of up to 4.6mi (7km)* and is capable of delivering both 1080p/720p video as well as FPV to pilot and camera op. Users can also switch between 2.4GHz and 5.8GHz** control frequencies to cut through noise for greater signal stability. *Unobstructed, free of interference, FCC compliant. **5.8GHz transmission is not available in some regions due to local regulations.
Master and Slave Controllers
New wireless HD image transmission technology sends video information from the master controller to the slave controller and the two controllers can be up to 100m apart without loss of image quality.
Broadcast mode
Broadcasters can broadcast direct from the Inspire 2 using its dedicated 1080i50 and 720p60 transmission signal. Aerial live-streaming direct to TV is as simple as connecting the Inspire 2 remote controller to the satellite truck.
Equipped with an uprated Micro 4/3 sensor, the Zenmuse X5S has a dynamic range of 12.8 stops with a much improved signal to noise ratio and color sensitivity than the X5R. It supports up to eight standard M4/3 lenses (including zoom lenses) with focal lengths ranging from 9mm-45mm (equivalent to 18mm-90mm on a 35mm camera), allowing more creative flexibility. The new CineCore 2.0 image processing system on the Inspire 2 makes the Zenmuse X5S capable of capturing 5.2K 30fps CinemaDNG video and Apple ProRes video as well as 4k 60fps using H.264 and 4K 30fps using H.265 (both at 100Mbps). Continuous DNG burst shooting at 20fps with 20.8MP images is also supported. The Zenmuse X5S was designed to keep pace with the rigors of high-end professional aerial imaging.
Inspire 2 Aerial Imaging Compared with the Inspire 1, the Inspire 2 utilizes an innovative structure that separates the CineCore 2.0 image processing system from the camera and places it inside the aircraft. This means that the sensor and optical system are detachable and easily connected using a newly designed quick-release connector. Designing the camera system in this way effectively protects the sensor from magnetic interference originating from the processor. It also allows a range of lightweight camera units to be connected as required by different scenes. The uprated M4/3 sensor — and support for interchangeable lenses — allows the Zenmuse X5S to capture high resolution images of incredibly high quality, when combined with the extraordinary CineCore 2.0 image processing system.
Improved Micro 4/3 Sensor The onboard Micro 4/3 sensor has been upgraded, significantly improving image quality. With a pixel size of 3.31 micrometer, this 20.8-megapixel sensor captures more detail than the previous sensor. It has 12.8 stops of dynamic range as well as a better signal to noise ratio and color sensitivity than the X5R, allowing it to create clear, low noise images in low light environments.
Array of Compatible Lenses Since it uses a standard Micro 4/3 mount, the Zenmuse X5S now supports up to eight professional lenses* with focal lengths ranging from 9mm-45mm (equivalent to 18mm-90mm on a 35mm camera), providing more creative control over the final look of a shot.
Hollywood-Grade Video Using CineCore 2.0, the Zenmuse X5S records video at a maximum resolution of 5.2K/30fps in CinemaDNG 12bit1, 5.2K 30fps Apple ProRes 422 HQ and 4K 30fps Apple ProRes 4444 XQ (no alpha)2. Additional recording options include video in 4K/60fps using H.264 or oversampling video in 4K/30fps using H.264/H.265, both with a bit rate of 100Mbps.
1, 2Additional licenses required
Fast and Efficient Workflows The DJI CINESSD card (PCIe3.0 NVMe SSD support) and a highly optimized FAT32/exFAT file system, allows Zenmuse X5S footage to be transferred directly through the DJI CINESSD STATION card reader to a computer at high speeds without any additional software. Footage also supports the DIT standard. CinemaDNG or Apple ProRes workflows can be used for post-processing.
Lossless In-Video Single and Burst Photo Capture Using only the Micro SD card, 20.8MP stills can be captured at 14fps in Burst Mode in JPEG+DNG. Using the DJI CINESSD opens up 20fps continuous DNG Burst Mode with a maximum image resolution of 20.8 mega pixels. Stills can also be taken during video recording without interruption.
Enhanced Camera Stabilazation Stabilizing the Zenmuse X5S is a highly optimized 3-axis gimbal with pinpoint-precise motor rotation with a control accuracy of ±0.010 powered by a dedicated processor. Rather than rely on electrical slip rings — as is common with many gimbals — the Zenmuse X5S uses a unique mechanically limited design and concealed wires to ensure more stable data transmission and greater durability. Vibration is eliminated using three damping balls and a lightweight damping board, creating seamlessly smooth video. 3600 rotation remains possible through gimbal rotation and smooth aircraft yaw. Stable, smooth footage1 can be captured even when using a 90mm2 lens.
1 Equivalent to 35mm camera’s standard focal length 2 Exposure time must be equal to or longer than 1)60 in GPS mode
Long-Range Camera and Focus Control Take control over every camera setting from afar, including focus, aperture, and format, directly in the DJl GO app. Precision control also extends to focus, with Dii GO and the optional Djl Focus, offering focus control across the entire transmission range. Using Dii Focus, no additional cables or motors are needed and new Lightbridge technology sends all signals as far as 4.3mi (7km) away.*
* Unobstructed, free of interference, when cc compliant.
Dronifi is a unified data acquisition software platform that delivers tools that professionals need for processing image data and quickly making them presentable to customers across multiple industries. With Dronifi, you can easily:
Upload aerial photos and videos to create 2D orthomosaics and 3D maps of your sites
Analyze the results
Provide customers with portals to access vital actionable information
Compare property snapshots over time with multiple flights
Organize and safely store your work
In addition, Dronifi provides sales and marketing tools to generate more sales for drone service businesses. Co-brand and customize reports with your business logo and messaging. Create a portfolio of flight projects for sales demonstrations branded to your business.
Request for a free demo account by email. Supplies are limited, so act now!
Note: The video below is for demonstration purposes only and may not represent actual product.
PRODUCT SUITE SUBSCRIPTIONS (Choose your subscription above)
Dronifi is dedicated to helping service providers and end users transform aerial imagery to actionable information within a wide range of industries. The following product suites are available on a hassle-free subscription basis.
Dronifi Agriculture Inspect fields to monitor plant health and growth. Increase ROI by improving overall crop health and yield with Dronifi's leading image analysis platform.
Data Allocation: 1 Job site, 10 flights (500 acres max per flight), 5,000 total acres max.
Dronifi Construction Monitor progress at construction sites and track material inventory. Stay on schedule and reduce project cost by improving labor productivity with Dronifi's industry leading image analysis platform.
Data Allocation: 3 Job sites, 20 flights, 600 total acres max.
Dronifi Commercial Real Estate Protect investments by obtaining information for inspecting commercial sites and monitoring property upkeep. Improve property maintenance and track short term and long term repairs with Dronifi's leading image analysis platform.
Data Allocation: 3 Job sites, 20 flights, 600 total acres max.
Dronifi Golf Manage greens on golf courses by assessing and monitor turf health. Improve the beauty and playability on golf courses with Dronifi's leading image analysis platform.
Data Allocation: 1 Job site, 10 flights (200 acres max per flight), 2000 total acres max.
Dronifi Solar Efficiently inspect solar fields and target malfunctioning or under-performing PV modules. Increase solar power productivity and reduce unit downtime by using Dronifi's industry leading image analysis platform.
Data Allocation: 3 Job sites, 20 flights, 1,000 total acres max.
Dronifi Real Estate Quickly create stunning videos and images for marketing and meaningful assessments of homes and properties. Improve property appeal and maintenance with Dronifi's leading image analysis platform.
Data Allocation: 10 Job sites, 50 flights, 500 total acres max.
Dronifi Parks & Recreation Inspect public parks and recreational facilities to monitor their condition and care. Improve facility maintenance programs to provide safer and happier experiences at public facilities with Dronifi's leading image analysis platform.
Data Allocation: 10 Job sites, 50 flights, 1,500 total acres max.
BUNDLED GOLD SUBSCRIPTIONS (Choose your subscription above)
Get unlimited customer demo accounts for a 30-day trial on each platform in the Dronifi product suite which includes Dronifi Agriculture, Dronifi Construction, Dronifi Commercial Real Estate, Dronifi Golf, Dronifi Solar, Dronifi Real Estate, and Dronifi Parks & Recreation. After the 30-day trial period, additional subscription is required.
Receive credits for storage, stitching and analysis of RGB, NIR, Multispectral and Thermal flights.
Dronifi Gold 3-Month Data Allocation: 12 flights with a maximum of 300 total acres. Data usage can be applied to product suites in any combination.
Dronifi Gold 1-Year Data Allocation: 50 flights with a maximum of 1200 total acres. Data usage can be applied to product suites in any combination.
Durable SKB military spec case used by the military and industry leaders
Four wide set in-line skate style wheels for easy transport
Waterproof and dust tight design
Ambient pressure equalization valve
Resistant to UV, solvents, corrosion, fungus
Resistant to impact damage
Manufacturer's lifetime replacement guarantee
Note: Requires about 2 weeks to ship
The DJI Inspire 2 Landing Mode Case maximizes efficiency by reducing setup time, and protects your Inspire 2 and accessories in a safe, waterproof environment. Will accommodate 6 flights worth of batteries. Other features include:
Water-jet precision cut foam
Industrial strength injection molded pull handle
Padlock holes include stainless steel padlock protector clips
Molded-in hinge for added protection
Trigger release latch system
Snap-down rubber over-molded cushion grip handle
External Dimensions (in.): 26.50 Long x 26.54 Wide x 15.65 Deep
