The transmitter (remote controller) integrates video downlink and aircraft control into one system. The combined system operates at 2.4 GHz with a maximum signal transmission range of 5 km. The device features a number of standard and customizable buttons that allow users to quickly access certain aircraft functions, such as taking and reviewing photos/videos, as well as controlling the gimbal and landing gear. It is powered by a 2S rechargeable battery.
Operating Frequency:
920.6 MHz to 928 MHz (Japan)
5.725 GHz to 5.825 GHz
2.400 GHz to 2.483 GHz
Max Transmission Distance (unobstructed, free of interference):
FCC Compliant: 3.1 miles (5 km)
CE Compliant: 2.1 miles (3.5 km)
EIRP:
10 dBm @ 900 M
13 dBm @ 5.8 G
20 dBm @ 2.4 G
Video Output Port: HDMI, SDI, USB Dual Users Capability: Master-and-Slave control Mobile Device Holder: Supports smartphones and tablets Output Power: 9 W Operating Temperature: 14° to 104° F (-10° to 40° C) Storage Temperature: Less than 3 months: -4° to 113° F (-20° to 45° C) More than 3 months: 72° to 82° F (22° to 28° C) Charge Temperature: 32° to 104° F (0° to 40° C) Built-in Battery: 6000 mAh, 2S LiPo Max Tablet Width: 170 mm
Spot metering, temperature measurement at the mid-point
Take photos while recording video
103 mm x 74 mm x 102 mm, 270g
Available in 6.8mm, 9mm, 13mm, and 19mm Lenses (Specify lens above)
This is a special order product - Please allow 7-10 days for shipment
Unlock the Possibility of Sight Thermal imaging from the air has never been as easy as it is with the DJI Zenmuse XT. By combining DJI’s unrivaled expertise in gimbal technology and image transmission with the industry leading thermal imaging technology of FLIR, the Zenmuse XT is the ultimate solution for rapid and reliable aerial thermal imaging. Capture faster, with pinpoint precision, over large areas, then save them for analysis and reporting.
Note: The video below is for demonstration purposes only and may not represent actual product.
Integrated Thermal Camera The camera on the DJI Zenmuse XT is developed by FLIR. It provides high-sensitivity (50mK) infrared scanning at 640/30 fps or 336/60 fps depending on the camera model. This sensitivity provides accurate temperature measurements ideal for analytics and telemetry. Both cameras are available with four lens options to meet different business needs. Stabilized and controlled by a custom DJI gimbal, it provides smooth, clear imagery and 360 degrees of seamless rotational movement.
FLIR+DJI=Powerful Airborne Solutions DJI’s Zenmuse gimbal technology has become the industry standard among demanding aerial cinematographers, and everything that makes DJI’s aerial platforms world-class for cinematography also makes them the perfect platforms for aerial thermal imaging: they’re stable, easy to fly, and fully-integrated with apps.
When you get right down to it, the main purpose of any drone is to position a sensor in three-dimensional space; when that sensor is a FLIR thermal imager, you expand the possibilities for drone operators and thermal inspectors alike. Using FLIR thermal imaging from small drones brings new capabilities to dozens of applications like search and rescue, the inspection of power lines, cell towers, bridges, substations, and buildings, firefighting, precision agriculture, and natural resource and wildlife protection.
See the unseen. FLIR cameras reveal details invisible to the naked eye by making subtle differences in temperature visible. This new view on the world can reveal when equipment or buildings are damaged, the location of lost people and much more. Applications like:
Search and rescue
Precision agriculture
Roof inspections
Power line inspections
Firefighting
Substation inspections
Cell tower inspections
Security
Surveying
And anything else you can dream up
Image Enhancement Software
Infra-red imagery requires optimization to ensure maximum definition for capturing information. The Zenmuse XT features a suite of image enhancements designed by FLIR including Digital Detail Enhancement™ (DDE); Smart Scene Optimization™ (SSO), which enhances extremes in bi-modal scenes; Active Contrast Enhancement™ (ACE) that adjusts scene contrast relative to its temperature difference; and Information Based HEQ™ (IBHEQ) which compresses complex image data to create the best quality image.
Fingertip Control The Zenmuse XT can be controlled completely through the DJI GO app, providing a real-time, low latency view of what the camera sees, and instant access to core camera functions including:
Spot metering, temperature measurement at the mid-point
Digital zoom
Single or interval shooting modes
Photo, video preview and download
Take photos while recording video
Various camera settings and parameters including:
Palette, also referred to as Look-up Table (LUT)
Scene, also referred to as Automatic Gain Correction (AGC)
Region of Interest (ROI)
Isotherm mode
Mission Ready Mounted on the Inspire 1, the Zenmuse XT is ready to launch in seconds. Its seamless integration gives you access to important features like DJI’s powerful Lightbridge video transmission system, automated Point of Interest, Course and Home Lock, Follow Me, and the DJI SDK.
*Inspire 1: Flight times vary based on flight conditions, with a maximum 22 minute flight time being recorded when hovering with a TB48 battery using the Zenmuse XT gimbal camera. *M100: Flight times vary based on payload and flight conditions, with a maximum 35 minute flight time being recorded when hovering with dual TB48D batteries and no additional payload other than a Zenmuse XT gimbal camera. *M600: Flight time not available.
DJI FLIR Zenmuse XT 336x256 30Hz Thermal Camera - Radiometric
Price: Select "Get Custom Package Quote" in Cart
Radiometric version gives absolute temperatures
High-sensitivity (50mK) infrared thermal scanning
Single or interval shooting modes
Spot metering, temperature measurement at the mid-point
Take photos while recording video
103 mm x 74 mm x 102 mm, 270g
Available in 6.8mm, 9mm, 13mm, and 19mm Lenses (Specify lens above)
This is a special order product - Please allow 7-10 days for shipment
Unlock the Possibility of Sight Thermal imaging from the air has never been as easy as it is with the DJI Zenmuse XT. By combining DJI’s unrivaled expertise in gimbal technology and image transmission with the industry leading thermal imaging technology of FLIR, the Zenmuse XT is the ultimate solution for rapid and reliable aerial thermal imaging. Capture faster, with pinpoint precision, over large areas, then save them for analysis and reporting.
Note: The video below is for demonstration purposes only and may not represent actual product.
Integrated Thermal Camera The camera on the DJI Zenmuse XT is developed by FLIR. It provides high-sensitivity (50mK) infrared scanning at 640/30 fps or 336/60 fps depending on the camera model. This sensitivity provides accurate temperature measurements ideal for analytics and telemetry. Both cameras are available with four lens options to meet different business needs. Stabilized and controlled by a custom DJI gimbal, it provides smooth, clear imagery and 360 degrees of seamless rotational movement.
FLIR+DJI=Powerful Airborne Solutions DJI’s Zenmuse gimbal technology has become the industry standard among demanding aerial cinematographers, and everything that makes DJI’s aerial platforms world-class for cinematography also makes them the perfect platforms for aerial thermal imaging: they’re stable, easy to fly, and fully-integrated with apps.
When you get right down to it, the main purpose of any drone is to position a sensor in three-dimensional space; when that sensor is a FLIR thermal imager, you expand the possibilities for drone operators and thermal inspectors alike. Using FLIR thermal imaging from small drones brings new capabilities to dozens of applications like search and rescue, the inspection of power lines, cell towers, bridges, substations, and buildings, firefighting, precision agriculture, and natural resource and wildlife protection.
See the unseen. FLIR cameras reveal details invisible to the naked eye by making subtle differences in temperature visible. This new view on the world can reveal when equipment or buildings are damaged, the location of lost people and much more. Applications like:
Search and rescue
Precision agriculture
Roof inspections
Power line inspections
Firefighting
Substation inspections
Cell tower inspections
Security
Surveying
And anything else you can dream up
Image Enhancement Software
Infra-red imagery requires optimization to ensure maximum definition for capturing information. The Zenmuse XT features a suite of image enhancements designed by FLIR including Digital Detail Enhancement™ (DDE); Smart Scene Optimization™ (SSO), which enhances extremes in bi-modal scenes; Active Contrast Enhancement™ (ACE) that adjusts scene contrast relative to its temperature difference; and Information Based HEQ™ (IBHEQ) which compresses complex image data to create the best quality image.
Fingertip Control The Zenmuse XT can be controlled completely through the DJI GO app, providing a real-time, low latency view of what the camera sees, and instant access to core camera functions including:
Spot metering, temperature measurement at the mid-point
Digital zoom
Single or interval shooting modes
Photo, video preview and download
Take photos while recording video
Various camera settings and parameters including:
Palette, also referred to as Look-up Table (LUT)
Scene, also referred to as Automatic Gain Correction (AGC)
Region of Interest (ROI)
Isotherm mode
Mission Ready Mounted on the Inspire 1, the Zenmuse XT is ready to launch in seconds. Its seamless integration gives you access to important features like DJI’s powerful Lightbridge video transmission system, automated Point of Interest, Course and Home Lock, Follow Me, and the DJI SDK.
*Inspire 1: Flight times vary based on flight conditions, with a maximum 22 minute flight time being recorded when hovering with a TB48 battery using the Zenmuse XT gimbal camera. *M100: Flight times vary based on payload and flight conditions, with a maximum 35 minute flight time being recorded when hovering with dual TB48D batteries and no additional payload other than a Zenmuse XT gimbal camera. *M600: Flight time not available.
Spot metering, temperature measurement at the mid-point
Take photos while recording video
103 mm x 74 mm x 102 mm, 270g
Available in 6.8mm, 9mm, 13mm, and 19mm Lenses (Specify lens above)
This is a special order product - Please allow 7-10 days for shipment
Unlock the Possibility of Sight Thermal imaging from the air has never been as easy as it is with the DJI Zenmuse XT. By combining DJI’s unrivaled expertise in gimbal technology and image transmission with the industry leading thermal imaging technology of FLIR, the Zenmuse XT is the ultimate solution for rapid and reliable aerial thermal imaging. Capture faster, with pinpoint precision, over large areas, then save them for analysis and reporting.
Note: The video below is for demonstration purposes only and may not represent actual product.
Integrated Thermal Camera The camera on the DJI Zenmuse XT is developed by FLIR. It provides high-sensitivity (50mK) infrared scanning at 640/30 fps or 336/60 fps depending on the camera model. This sensitivity provides accurate temperature measurements ideal for analytics and telemetry. Both cameras are available with four lens options to meet different business needs. Stabilized and controlled by a custom DJI gimbal, it provides smooth, clear imagery and 360 degrees of seamless rotational movement.
FLIR+DJI=Powerful Airborne Solutions DJI’s Zenmuse gimbal technology has become the industry standard among demanding aerial cinematographers, and everything that makes DJI’s aerial platforms world-class for cinematography also makes them the perfect platforms for aerial thermal imaging: they’re stable, easy to fly, and fully-integrated with apps.
When you get right down to it, the main purpose of any drone is to position a sensor in three-dimensional space; when that sensor is a FLIR thermal imager, you expand the possibilities for drone operators and thermal inspectors alike. Using FLIR thermal imaging from small drones brings new capabilities to dozens of applications like search and rescue, the inspection of power lines, cell towers, bridges, substations, and buildings, firefighting, precision agriculture, and natural resource and wildlife protection.
See the unseen. FLIR cameras reveal details invisible to the naked eye by making subtle differences in temperature visible. This new view on the world can reveal when equipment or buildings are damaged, the location of lost people and much more. Applications like:
Search and rescue
Precision agriculture
Roof inspections
Power line inspections
Firefighting
Substation inspections
Cell tower inspections
Security
Surveying
And anything else you can dream up
Image Enhancement Software
Infra-red imagery requires optimization to ensure maximum definition for capturing information. The Zenmuse XT features a suite of image enhancements designed by FLIR including Digital Detail Enhancement™ (DDE); Smart Scene Optimization™ (SSO), which enhances extremes in bi-modal scenes; Active Contrast Enhancement™ (ACE) that adjusts scene contrast relative to its temperature difference; and Information Based HEQ™ (IBHEQ) which compresses complex image data to create the best quality image.
Fingertip Control The Zenmuse XT can be controlled completely through the DJI GO app, providing a real-time, low latency view of what the camera sees, and instant access to core camera functions including:
Spot metering, temperature measurement at the mid-point
Digital zoom
Single or interval shooting modes
Photo, video preview and download
Take photos while recording video
Various camera settings and parameters including:
Palette, also referred to as Look-up Table (LUT)
Scene, also referred to as Automatic Gain Correction (AGC)
Region of Interest (ROI)
Isotherm mode
Mission Ready Mounted on the Inspire 1, the Zenmuse XT is ready to launch in seconds. Its seamless integration gives you access to important features like DJI’s powerful Lightbridge video transmission system, automated Point of Interest, Course and Home Lock, Follow Me, and the DJI SDK.
*Inspire 1: Flight times vary based on flight conditions, with a maximum 22 minute flight time being recorded when hovering with a TB48 battery using the Zenmuse XT gimbal camera. *M100: Flight times vary based on payload and flight conditions, with a maximum 35 minute flight time being recorded when hovering with dual TB48D batteries and no additional payload other than a Zenmuse XT gimbal camera. *M600: Flight time not available.
DJI FLIR Zenmuse XT 336x256 9Hz Thermal Camera - Radiometric
Price: Select "Get Custom Package Quote" in Cart
Radiometric version gives absolute temperatures
High-sensitivity (50mK) infrared thermal scanning
Single or interval shooting modes
Spot metering, temperature measurement at the mid-point
Take photos while recording video
103 mm x 74 mm x 102 mm, 270g
Available in 6.8mm 9mm, 13mm, and 19mm Lenses (Specify lens above)
This is a special order product - Please allow 7-10 days for shipment
Unlock the Possibility of Sight Thermal imaging from the air has never been as easy as it is with the DJI Zenmuse XT. By combining DJI’s unrivaled expertise in gimbal technology and image transmission with the industry leading thermal imaging technology of FLIR, the Zenmuse XT is the ultimate solution for rapid and reliable aerial thermal imaging. Capture faster, with pinpoint precision, over large areas, then save them for analysis and reporting.
Note: The video below is for demonstration purposes only and may not represent actual product.
Integrated Thermal Camera The camera on the DJI Zenmuse XT is developed by FLIR. It provides high-sensitivity (50mK) infrared scanning at 640/30 fps or 336/60 fps depending on the camera model. This sensitivity provides accurate temperature measurements ideal for analytics and telemetry. Both cameras are available with four lens options to meet different business needs. Stabilized and controlled by a custom DJI gimbal, it provides smooth, clear imagery and 360 degrees of seamless rotational movement.
FLIR+DJI=Powerful Airborne Solutions DJI’s Zenmuse gimbal technology has become the industry standard among demanding aerial cinematographers, and everything that makes DJI’s aerial platforms world-class for cinematography also makes them the perfect platforms for aerial thermal imaging: they’re stable, easy to fly, and fully-integrated with apps.
When you get right down to it, the main purpose of any drone is to position a sensor in three-dimensional space; when that sensor is a FLIR thermal imager, you expand the possibilities for drone operators and thermal inspectors alike. Using FLIR thermal imaging from small drones brings new capabilities to dozens of applications like search and rescue, the inspection of power lines, cell towers, bridges, substations, and buildings, firefighting, precision agriculture, and natural resource and wildlife protection.
See the unseen. FLIR cameras reveal details invisible to the naked eye by making subtle differences in temperature visible. This new view on the world can reveal when equipment or buildings are damaged, the location of lost people and much more. Applications like:
Search and rescue
Precision agriculture
Roof inspections
Power line inspections
Firefighting
Substation inspections
Cell tower inspections
Security
Surveying
And anything else you can dream up
Image Enhancement Software
Infra-red imagery requires optimization to ensure maximum definition for capturing information. The Zenmuse XT features a suite of image enhancements designed by FLIR including Digital Detail Enhancement™ (DDE); Smart Scene Optimization™ (SSO), which enhances extremes in bi-modal scenes; Active Contrast Enhancement™ (ACE) that adjusts scene contrast relative to its temperature difference; and Information Based HEQ™ (IBHEQ) which compresses complex image data to create the best quality image.
Fingertip Control The Zenmuse XT can be controlled completely through the DJI GO app, providing a real-time, low latency view of what the camera sees, and instant access to core camera functions including:
Spot metering, temperature measurement at the mid-point
Digital zoom
Single or interval shooting modes
Photo, video preview and download
Take photos while recording video
Various camera settings and parameters including:
Palette, also referred to as Look-up Table (LUT)
Scene, also referred to as Automatic Gain Correction (AGC)
Region of Interest (ROI)
Isotherm mode
Mission Ready Mounted on the Inspire 1, the Zenmuse XT is ready to launch in seconds. Its seamless integration gives you access to important features like DJI’s powerful Lightbridge video transmission system, automated Point of Interest, Course and Home Lock, Follow Me, and the DJI SDK.
*Inspire 1: Flight times vary based on flight conditions, with a maximum 22 minute flight time being recorded when hovering with a TB48 battery using the Zenmuse XT gimbal camera. *M100: Flight times vary based on payload and flight conditions, with a maximum 35 minute flight time being recorded when hovering with dual TB48D batteries and no additional payload other than a Zenmuse XT gimbal camera. *M600: Flight time not available.
Spot metering, temperature measurement at the mid-point
Take photos while recording video
103 mm x 74 mm x 102 mm, 270g
Available in 7.5mm, 9mm, 13mm, and 19mm Lenses (Specify lens above)
This is a special order product - Please allow 7-10 days for shipment
Unlock the Possibility of Sight Thermal imaging from the air has never been as easy as it is with the DJI Zenmuse XT. By combining DJI’s unrivaled expertise in gimbal technology and image transmission with the industry leading thermal imaging technology of FLIR, the Zenmuse XT is the ultimate solution for rapid and reliable aerial thermal imaging. Capture faster, with pinpoint precision, over large areas, then save them for analysis and reporting.
Note: The video below is for demonstration purposes only and may not represent actual product.
Integrated Thermal Camera The camera on the DJI Zenmuse XT is developed by FLIR. It provides high-sensitivity (50mK) infrared scanning at 640/30 fps or 336/60 fps depending on the camera model. This sensitivity provides accurate temperature measurements ideal for analytics and telemetry. Both cameras are available with four lens options to meet different business needs. Stabilized and controlled by a custom DJI gimbal, it provides smooth, clear imagery and 360 degrees of seamless rotational movement.
FLIR+DJI=Powerful Airborne Solutions DJI’s Zenmuse gimbal technology has become the industry standard among demanding aerial cinematographers, and everything that makes DJI’s aerial platforms world-class for cinematography also makes them the perfect platforms for aerial thermal imaging: they’re stable, easy to fly, and fully-integrated with apps.
When you get right down to it, the main purpose of any drone is to position a sensor in three-dimensional space; when that sensor is a FLIR thermal imager, you expand the possibilities for drone operators and thermal inspectors alike. Using FLIR thermal imaging from small drones brings new capabilities to dozens of applications like search and rescue, the inspection of power lines, cell towers, bridges, substations, and buildings, firefighting, precision agriculture, and natural resource and wildlife protection.
See the unseen. FLIR cameras reveal details invisible to the naked eye by making subtle differences in temperature visible. This new view on the world can reveal when equipment or buildings are damaged, the location of lost people and much more. Applications like:
Search and rescue
Precision agriculture
Roof inspections
Power line inspections
Firefighting
Substation inspections
Cell tower inspections
Security
Surveying
And anything else you can dream up
Image Enhancement Software
Infra-red imagery requires optimization to ensure maximum definition for capturing information. The Zenmuse XT features a suite of image enhancements designed by FLIR including Digital Detail Enhancement™ (DDE); Smart Scene Optimization™ (SSO), which enhances extremes in bi-modal scenes; Active Contrast Enhancement™ (ACE) that adjusts scene contrast relative to its temperature difference; and Information Based HEQ™ (IBHEQ) which compresses complex image data to create the best quality image.
Fingertip Control The Zenmuse XT can be controlled completely through the DJI GO app, providing a real-time, low latency view of what the camera sees, and instant access to core camera functions including:
Spot metering, temperature measurement at the mid-point
Digital zoom
Single or interval shooting modes
Photo, video preview and download
Take photos while recording video
Various camera settings and parameters including:
Palette, also referred to as Look-up Table (LUT)
Scene, also referred to as Automatic Gain Correction (AGC)
Region of Interest (ROI)
Isotherm mode
Mission Ready Mounted on the Inspire 1, the Zenmuse XT is ready to launch in seconds. Its seamless integration gives you access to important features like DJI’s powerful Lightbridge video transmission system, automated Point of Interest, Course and Home Lock, Follow Me, and the DJI SDK.
*Inspire 1: Flight times vary based on flight conditions, with a maximum 22 minute flight time being recorded when hovering with a TB48 battery using the Zenmuse XT gimbal camera. *M100: Flight times vary based on payload and flight conditions, with a maximum 35 minute flight time being recorded when hovering with dual TB48D batteries and no additional payload other than a Zenmuse XT gimbal camera. *M600: Flight time not available.
DJI FLIR Zenmuse XT 640x512 30Hz Thermal Camera - Radiometric
Price: Select "Get Custom Package Quote" in Cart
Radiometric version gives absolute temperatures
High-sensitivity (50mK) infrared thermal scanning
Single or interval shooting modes
Spot metering, temperature measurement at the mid-point
Take photos while recording video
103 mm x 74 mm x 102 mm, 270g
Available in 9mm, 13mm, and 19mm Lenses (Specify lens above)
This is a special order product - Please allow 7-10 days for shipment
Unlock the Possibility of Sight Thermal imaging from the air has never been as easy as it is with the DJI Zenmuse XT. By combining DJI’s unrivaled expertise in gimbal technology and image transmission with the industry leading thermal imaging technology of FLIR, the Zenmuse XT is the ultimate solution for rapid and reliable aerial thermal imaging. Capture faster, with pinpoint precision, over large areas, then save them for analysis and reporting.
Note: The video below is for demonstration purposes only and may not represent actual product.
Integrated Thermal Camera The camera on the DJI Zenmuse XT is developed by FLIR. It provides high-sensitivity (50mK) infrared scanning at 640/30 fps or 336/60 fps depending on the camera model. This sensitivity provides accurate temperature measurements ideal for analytics and telemetry. Both cameras are available with four lens options to meet different business needs. Stabilized and controlled by a custom DJI gimbal, it provides smooth, clear imagery and 360 degrees of seamless rotational movement.
FLIR+DJI=Powerful Airborne Solutions DJI’s Zenmuse gimbal technology has become the industry standard among demanding aerial cinematographers, and everything that makes DJI’s aerial platforms world-class for cinematography also makes them the perfect platforms for aerial thermal imaging: they’re stable, easy to fly, and fully-integrated with apps.
When you get right down to it, the main purpose of any drone is to position a sensor in three-dimensional space; when that sensor is a FLIR thermal imager, you expand the possibilities for drone operators and thermal inspectors alike. Using FLIR thermal imaging from small drones brings new capabilities to dozens of applications like search and rescue, the inspection of power lines, cell towers, bridges, substations, and buildings, firefighting, precision agriculture, and natural resource and wildlife protection.
See the unseen. FLIR cameras reveal details invisible to the naked eye by making subtle differences in temperature visible. This new view on the world can reveal when equipment or buildings are damaged, the location of lost people and much more. Applications like:
Search and rescue
Precision agriculture
Roof inspections
Power line inspections
Firefighting
Substation inspections
Cell tower inspections
Security
Surveying
And anything else you can dream up
Image Enhancement Software
Infra-red imagery requires optimization to ensure maximum definition for capturing information. The Zenmuse XT features a suite of image enhancements designed by FLIR including Digital Detail Enhancement™ (DDE); Smart Scene Optimization™ (SSO), which enhances extremes in bi-modal scenes; Active Contrast Enhancement™ (ACE) that adjusts scene contrast relative to its temperature difference; and Information Based HEQ™ (IBHEQ) which compresses complex image data to create the best quality image.
Fingertip Control The Zenmuse XT can be controlled completely through the DJI GO app, providing a real-time, low latency view of what the camera sees, and instant access to core camera functions including:
Spot metering, temperature measurement at the mid-point
Digital zoom
Single or interval shooting modes
Photo, video preview and download
Take photos while recording video
Various camera settings and parameters including:
Palette, also referred to as Look-up Table (LUT)
Scene, also referred to as Automatic Gain Correction (AGC)
Region of Interest (ROI)
Isotherm mode
Mission Ready Mounted on the Inspire 1, the Zenmuse XT is ready to launch in seconds. Its seamless integration gives you access to important features like DJI’s powerful Lightbridge video transmission system, automated Point of Interest, Course and Home Lock, Follow Me, and the DJI SDK.
*Inspire 1: Flight times vary based on flight conditions, with a maximum 22 minute flight time being recorded when hovering with a TB48 battery using the Zenmuse XT gimbal camera. *M100: Flight times vary based on payload and flight conditions, with a maximum 35 minute flight time being recorded when hovering with dual TB48D batteries and no additional payload other than a Zenmuse XT gimbal camera. *M600: Flight time not available.
Spot metering, temperature measurement at the mid-point
Take photos while recording video
103 mm x 74 mm x 102 mm, 270g
Available in 7.5mm, 9mm, 13mm, and 19mm Lenses (Specify lens above)
This is a special order product - Please allow 7-10 days for shipment
Unlock the Possibility of Sight Thermal imaging from the air has never been as easy as it is with the DJI Zenmuse XT. By combining DJI’s unrivaled expertise in gimbal technology and image transmission with the industry leading thermal imaging technology of FLIR, the Zenmuse XT is the ultimate solution for rapid and reliable aerial thermal imaging. Capture faster, with pinpoint precision, over large areas, then save them for analysis and reporting.
Note: The video below is for demonstration purposes only and may not represent actual product.
Integrated Thermal Camera The camera on the DJI Zenmuse XT is developed by FLIR. It provides high-sensitivity (50mK) infrared scanning at 640/30 fps or 336/60 fps depending on the camera model. This sensitivity provides accurate temperature measurements ideal for analytics and telemetry. Both cameras are available with four lens options to meet different business needs. Stabilized and controlled by a custom DJI gimbal, it provides smooth, clear imagery and 360 degrees of seamless rotational movement.
FLIR+DJI=Powerful Airborne Solutions DJI’s Zenmuse gimbal technology has become the industry standard among demanding aerial cinematographers, and everything that makes DJI’s aerial platforms world-class for cinematography also makes them the perfect platforms for aerial thermal imaging: they’re stable, easy to fly, and fully-integrated with apps.
When you get right down to it, the main purpose of any drone is to position a sensor in three-dimensional space; when that sensor is a FLIR thermal imager, you expand the possibilities for drone operators and thermal inspectors alike. Using FLIR thermal imaging from small drones brings new capabilities to dozens of applications like search and rescue, the inspection of power lines, cell towers, bridges, substations, and buildings, firefighting, precision agriculture, and natural resource and wildlife protection.
See the unseen. FLIR cameras reveal details invisible to the naked eye by making subtle differences in temperature visible. This new view on the world can reveal when equipment or buildings are damaged, the location of lost people and much more. Applications like:
Search and rescue
Precision agriculture
Roof inspections
Power line inspections
Firefighting
Substation inspections
Cell tower inspections
Security
Surveying
And anything else you can dream up
Image Enhancement Software
Infra-red imagery requires optimization to ensure maximum definition for capturing information. The Zenmuse XT features a suite of image enhancements designed by FLIR including Digital Detail Enhancement™ (DDE); Smart Scene Optimization™ (SSO), which enhances extremes in bi-modal scenes; Active Contrast Enhancement™ (ACE) that adjusts scene contrast relative to its temperature difference; and Information Based HEQ™ (IBHEQ) which compresses complex image data to create the best quality image.
Fingertip Control The Zenmuse XT can be controlled completely through the DJI GO app, providing a real-time, low latency view of what the camera sees, and instant access to core camera functions including:
Spot metering, temperature measurement at the mid-point
Digital zoom
Single or interval shooting modes
Photo, video preview and download
Take photos while recording video
Various camera settings and parameters including:
Palette, also referred to as Look-up Table (LUT)
Scene, also referred to as Automatic Gain Correction (AGC)
Region of Interest (ROI)
Isotherm mode
Mission Ready Mounted on the Inspire 1, the Zenmuse XT is ready to launch in seconds. Its seamless integration gives you access to important features like DJI’s powerful Lightbridge video transmission system, automated Point of Interest, Course and Home Lock, Follow Me, and the DJI SDK.
*Inspire 1: Flight times vary based on flight conditions, with a maximum 22 minute flight time being recorded when hovering with a TB48 battery using the Zenmuse XT gimbal camera. *M100: Flight times vary based on payload and flight conditions, with a maximum 35 minute flight time being recorded when hovering with dual TB48D batteries and no additional payload other than a Zenmuse XT gimbal camera. *M600: Flight time not available.
DJI FLIR Zenmuse XT 640x512 9Hz Thermal Camera - Radiometric
Price: Select "Get Custom Package Quote" in Cart
Radiometric version gives absolute temperatures
High-sensitivity (50mK) infrared thermal scanning
Single or interval shooting modes
Spot metering, temperature measurement at the mid-point
Take photos while recording video
103 mm x 74 mm x 102 mm, 270g
Available in 9mm, 13mm, and 19mm Lenses (Specify lens above)
This is a special order product - Please allow 7-10 days for shipment
Unlock the Possibility of Sight Thermal imaging from the air has never been as easy as it is with the DJI Zenmuse XT. By combining DJI’s unrivaled expertise in gimbal technology and image transmission with the industry leading thermal imaging technology of FLIR, the Zenmuse XT is the ultimate solution for rapid and reliable aerial thermal imaging. Capture faster, with pinpoint precision, over large areas, then save them for analysis and reporting.
Note: The video below is for demonstration purposes only and may not represent actual product.
Integrated Thermal Camera The camera on the DJI Zenmuse XT is developed by FLIR. It provides high-sensitivity (50mK) infrared scanning at 640/30 fps or 336/60 fps depending on the camera model. This sensitivity provides accurate temperature measurements ideal for analytics and telemetry. Both cameras are available with four lens options to meet different business needs. Stabilized and controlled by a custom DJI gimbal, it provides smooth, clear imagery and 360 degrees of seamless rotational movement.
FLIR+DJI=Powerful Airborne Solutions DJI’s Zenmuse gimbal technology has become the industry standard among demanding aerial cinematographers, and everything that makes DJI’s aerial platforms world-class for cinematography also makes them the perfect platforms for aerial thermal imaging: they’re stable, easy to fly, and fully-integrated with apps.
When you get right down to it, the main purpose of any drone is to position a sensor in three-dimensional space; when that sensor is a FLIR thermal imager, you expand the possibilities for drone operators and thermal inspectors alike. Using FLIR thermal imaging from small drones brings new capabilities to dozens of applications like search and rescue, the inspection of power lines, cell towers, bridges, substations, and buildings, firefighting, precision agriculture, and natural resource and wildlife protection.
See the unseen. FLIR cameras reveal details invisible to the naked eye by making subtle differences in temperature visible. This new view on the world can reveal when equipment or buildings are damaged, the location of lost people and much more. Applications like:
Search and rescue
Precision agriculture
Roof inspections
Power line inspections
Firefighting
Substation inspections
Cell tower inspections
Security
Surveying
And anything else you can dream up
Image Enhancement Software
Infra-red imagery requires optimization to ensure maximum definition for capturing information. The Zenmuse XT features a suite of image enhancements designed by FLIR including Digital Detail Enhancement™ (DDE); Smart Scene Optimization™ (SSO), which enhances extremes in bi-modal scenes; Active Contrast Enhancement™ (ACE) that adjusts scene contrast relative to its temperature difference; and Information Based HEQ™ (IBHEQ) which compresses complex image data to create the best quality image.
Fingertip Control The Zenmuse XT can be controlled completely through the DJI GO app, providing a real-time, low latency view of what the camera sees, and instant access to core camera functions including:
Spot metering, temperature measurement at the mid-point
Digital zoom
Single or interval shooting modes
Photo, video preview and download
Take photos while recording video
Various camera settings and parameters including:
Palette, also referred to as Look-up Table (LUT)
Scene, also referred to as Automatic Gain Correction (AGC)
Region of Interest (ROI)
Isotherm mode
Mission Ready Mounted on the Inspire 1, the Zenmuse XT is ready to launch in seconds. Its seamless integration gives you access to important features like DJI’s powerful Lightbridge video transmission system, automated Point of Interest, Course and Home Lock, Follow Me, and the DJI SDK.
*Inspire 1: Flight times vary based on flight conditions, with a maximum 22 minute flight time being recorded when hovering with a TB48 battery using the Zenmuse XT gimbal camera. *M100: Flight times vary based on payload and flight conditions, with a maximum 35 minute flight time being recorded when hovering with dual TB48D batteries and no additional payload other than a Zenmuse XT gimbal camera. *M600: Flight time not available.
DJI FLIR Zenmuse XT2 336x256 30Hz Thermal Camera - Radiometric
Price: Select "Get Custom Package Quote" in Cart
Dual camera configuration using FLIR Tau 2 thermal sensor and 4K visual camera
Available in 9mm, 13mm, and 19mm Lenses (Specify lens above)
This is a special order product - Please allow 7-10 days for shipment
DJI FLIR Zenmuse XT2 is the next generation of commercial drone solutions that combines RGB and thermogram solutions into a single package. Pairing the FLIR Tau 2 thermal sensor and 4K visual camera with DJI's leading stabilization and machine intelligence technology, the XT2 quickly transforms aerial data into powerful insights that save time, money, and lives.
Note: The video below is for demonstration purposes only and may not represent actual product.
Robust Dual-Sensor Thermal Solution Protected within a weather resistant encasing is a combination of FLIR's advanced radiometric thermal sensor and 4K visual sensor. Capable of integrating seamlessly with DJI's powerful enterprise drone platforms.
Thermal sensitivity (NEDT): <50 mK
Visual Sensor: 12 MP
Max Thermal Frame Rate: 30 Hz
Ingress Protection: IP44 (protected from water sprays)
Transform Data into Insights in Real-Time Enabled by a suite of processors and computer vision algorithms, the DJI FLIR Zenmuse XT2 onboard machine intelligence allows you to determine what’s important during operation in real-time.
Temp Alarm: Don’t miss a thing with instant notifications when object temperatures exceed a preset parameters.
Heat Track: Capture the most critical information by automatically locking the XT2 onto the hottest object in view.
FLIR MSX®: Quickly interpret data with details from the visual image overlaid on the thermal data stream.
Applications See the unseen. FLIR thermal sensors reveal details that are invisible to the naked eye by making subtle differences in temperature visible. This new view on the world can reveal equipment or structural damages, the location of various thermal signatures of interest, and much more. It's the ideal equipment for firefighting, solar panel inspections, HazMat operations, power line inspections, agriculture, roof inspections, and search operations.
Ready for Action The DJI FLIR Zenmuse XT2 thermal camera is compatible with the M200 Series and M600 Pro drones. The Zenmuse XT2 easily and securely mounts onto DJI’s industry-leading M200 Series and M600 Pro UAV platforms. When the XT2 is mounted onto a M200, M210, or the M210 RTK drone, pilots have a combined solution that extends the operation window for drone technology, allowing pilots to fly confidently in low-light operations, through windy environments, or in light rain conditions. Utilizing the M210, or M210 RTK UAV platform, pilots can build more robust drone solutions around the XT2 over time by adding zoom cameras, additional onboard computers and other payloads to fit a variety of specialized missions.
Purpose-Built Application
The DJI Pilot is a professional grade flight control Android app that is developed specifically for enterprise-users to unleash the power of their DJI drones. With development made specifically for the FLIR Zenmuse XT2, DJI Pilot optimizes your flight and aerial imaging process.
Access and adjust Spotlight Pro flight modes
Select area and parameters for Temp Alarm
On-screen temperature measurements
Access to color palette, isotherm, and other thermal settings
A tutorial on how to use the Zenmuse XT2 thermal camera can be found here.
A tutorial on capturing great thermal images can be found here.
DJI FLIR Zenmuse XT2 336x256 9Hz Thermal Camera - Radiometric
Price: Select "Get Custom Package Quote" in Cart
Dual camera configuration using FLIR Tau 2 thermal sensor and 4K visual camera
Available in 9mm, 13mm ,and 19mm Lenses (Specify lens above)
This is a special order product - Please allow 7-10 days for shipment
DJI FLIR Zenmuse XT2 is the next generation of commercial drone solutions that combines RGB and thermogram solutions into a single package. Pairing the FLIR Tau 2 thermal sensor and 4K visual camera with DJI's leading stabilization and machine intelligence technology, the XT2 quickly transforms aerial data into powerful insights that save time, money, and lives.
Note: The video below is for demonstration purposes only and may not represent actual product.
Robust Dual-Sensor Thermal Solution Protected within a weather resistant encasing is a combination of FLIR's advanced radiometric thermal sensor and 4K visual sensor. Capable of integrating seamlessly with DJI's powerful enterprise drone platforms.
Thermal sensitivity (NEDT): <50 mK
Visual Sensor: 12 MP
Max Thermal Frame Rate: 30 Hz
Ingress Protection: IP44 (protected from water sprays)
Transform Data into Insights in Real-Time Enabled by a suite of processors and computer vision algorithms, the DJI FLIR Zenmuse XT2 onboard machine intelligence allows you to determine what’s important during operation in real-time.
Temp Alarm: Don’t miss a thing with instant notifications when object temperatures exceed a preset parameters.
Heat Track: Capture the most critical information by automatically locking the XT2 onto the hottest object in view.
FLIR MSX®: Quickly interpret data with details from the visual image overlaid on the thermal data stream.
Applications See the unseen. FLIR thermal sensors reveal details that are invisible to the naked eye by making subtle differences in temperature visible. This new view on the world can reveal equipment or structural damages, the location of various thermal signatures of interest, and much more. It's the ideal equipment for firefighting, solar panel inspections, HazMat operations, power line inspections, agriculture, roof inspections, and search operations.
Ready for Action The DJI FLIR Zenmuse XT2 thermal camera is compatible with the M200 Series and M600 Pro drones. The Zenmuse XT2 easily and securely mounts onto DJI’s industry-leading M200 Series and M600 Pro UAV platforms. When the XT2 is mounted onto a M200, M210, or the M210 RTK drone, pilots have a combined solution that extends the operation window for drone technology, allowing pilots to fly confidently in low-light operations, through windy environments, or in light rain conditions. Utilizing the M210, or M210 RTK UAV platform, pilots can build more robust drone solutions around the XT2 over time by adding zoom cameras, additional onboard computers and other payloads to fit a variety of specialized missions.
Purpose-Built Application
The DJI Pilot is a professional grade flight control Android app that is developed specifically for enterprise-users to unleash the power of their DJI drones. With development made specifically for the FLIR Zenmuse XT2, DJI Pilot optimizes your flight and aerial imaging process.
Access and adjust Spotlight Pro flight modes
Select area and parameters for Temp Alarm
On-screen temperature measurements
Access to color palette, isotherm, and other thermal settings
A tutorial on how to use the Zenmuse XT2 thermal camera can be foundhere.
A tutorial on capturing great thermal images can be found here.
DJI FLIR Zenmuse XT2 640x512 30Hz Thermal Camera - Radiometric
Price: Select "Get Custom Package Quote" in Cart
Dual camera configuration using FLIR Tau 2 thermal sensor and 4K visual camera
Available in 13mm, 19mm, and 25mm Lenses (Specify lens above)
This is a special order product - Please allow 7-10 days for shipment
DJI FLIR Zenmuse XT2 is the next generation of commercial drone solutions that combines RGB and thermogram solutions into a single package. Pairing the FLIR Tau 2 thermal sensor and 4K visual camera with DJI's leading stabilization and machine intelligence technology, the XT2 quickly transforms aerial data into powerful insights that save time, money, and lives.
Note: The video below is for demonstration purposes only and may not represent actual product.
Robust Dual-Sensor Thermal Solution Protected within a weather resistant encasing is a combination of FLIR's advanced radiometric thermal sensor and 4K visual sensor. Capable of integrating seamlessly with DJI's powerful enterprise drone platforms.
Thermal sensitivity (NEDT): <50 mK
Visual Sensor: 12 MP
Max Thermal Frame Rate: 30 Hz
Ingress Protection: IP44 (protected from water sprays)
Transform Data into Insights in Real-Time Enabled by a suite of processors and computer vision algorithms, the DJI FLIR Zenmuse XT2 onboard machine intelligence allows you to determine what’s important during operation in real-time.
Temp Alarm: Don’t miss a thing with instant notifications when object temperatures exceed a preset parameters.
Heat Track: Capture the most critical information by automatically locking the XT2 onto the hottest object in view.
FLIR MSX®: Quickly interpret data with details from the visual image overlaid on the thermal data stream.
Applications See the unseen. FLIR thermal sensors reveal details that are invisible to the naked eye by making subtle differences in temperature visible. This new view on the world can reveal equipment or structural damages, the location of various thermal signatures of interest, and much more. It's the ideal equipment for firefighting, solar panel inspections, HazMat operations, power line inspections, agriculture, roof inspections, and search operations.
Ready for Action The DJI FLIR Zenmuse XT2 thermal camera is compatible with the M200 Series and M600 Pro drones. The Zenmuse XT2 easily and securely mounts onto DJI’s industry-leading M200 Series and M600 Pro UAV platforms. When the XT2 is mounted onto a M200, M210, or the M210 RTK drone, pilots have a combined solution that extends the operation window for drone technology, allowing pilots to fly confidently in low-light operations, through windy environments, or in light rain conditions. Utilizing the M210, or M210 RTK UAV platform, pilots can build more robust drone solutions around the XT2 over time by adding zoom cameras, additional onboard computers and other payloads to fit a variety of specialized missions.
Purpose-Built Application
The DJI Pilot is a professional grade flight control Android app that is developed specifically for enterprise-users to unleash the power of their DJI drones. With development made specifically for the FLIR Zenmuse XT2, DJI Pilot optimizes your flight and aerial imaging process.
Access and adjust Spotlight Pro flight modes
Select area and parameters for Temp Alarm
On-screen temperature measurements
Access to color palette, isotherm, and other thermal settings
A tutorial on how to use the Zenmuse XT2 thermal camera can be foundhere.
A tutorial on capturing great thermal images can be found here.
DJI FLIR Zenmuse XT2 640x512 9Hz Thermal Camera - Radiometric
Price: Select "Get Custom Package Quote" in Cart
Dual camera configuration using FLIR Tau 2 thermal sensor and 4K visual camera
Available in 13mm, 19mm, and 25mm Lenses (Specify lens above)
This is a special order product - Please allow 7-10 days for shipment
DJI FLIR Zenmuse XT2 is the next generation of commercial drone solutions that combines RGB and thermogram solutions into a single package. Pairing the FLIR Tau 2 thermal sensor and 4K visual camera with DJI's leading stabilization and machine intelligence technology, the XT2 quickly transforms aerial data into powerful insights that save time, money, and lives.
Note: The video below is for demonstration purposes only and may not represent actual product.
Robust Dual-Sensor Thermal Solution Protected within a weather resistant encasing is a combination of FLIR's advanced radiometric thermal sensor and 4K visual sensor. Capable of integrating seamlessly with DJI's powerful enterprise drone platforms.
Thermal sensitivity (NEDT): <50 mK
Visual Sensor: 12 MP
Max Thermal Frame Rate: 30 Hz
Ingress Protection: IP44 (protected from water sprays)
Transform Data into Insights in Real-Time Enabled by a suite of processors and computer vision algorithms, the DJI FLIR Zenmuse XT2 onboard machine intelligence allows you to determine what’s important during operation in real-time.
Temp Alarm: Don’t miss a thing with instant notifications when object temperatures exceed a preset parameters.
Heat Track: Capture the most critical information by automatically locking the XT2 onto the hottest object in view.
FLIR MSX®: Quickly interpret data with details from the visual image overlaid on the thermal data stream.
Applications See the unseen. FLIR thermal sensors reveal details that are invisible to the naked eye by making subtle differences in temperature visible. This new view on the world can reveal equipment or structural damages, the location of various thermal signatures of interest, and much more. It's the ideal equipment for firefighting, solar panel inspections, HazMat operations, power line inspections, agriculture, roof inspections, and search operations.
Ready for Action The DJI FLIR Zenmuse XT2 thermal camera is compatible with the M200 Series and M600 Pro drones. The Zenmuse XT2 easily and securely mounts onto DJI’s industry-leading M200 Series and M600 Pro UAV platforms. When the XT2 is mounted onto a M200, M210, or the M210 RTK drone, pilots have a combined solution that extends the operation window for drone technology, allowing pilots to fly confidently in low-light operations, through windy environments, or in light rain conditions. Utilizing the M210, or M210 RTK UAV platform, pilots can build more robust drone solutions around the XT2 over time by adding zoom cameras, additional onboard computers and other payloads to fit a variety of specialized missions.
Purpose-Built Application
The DJI Pilot is a professional grade flight control Android app that is developed specifically for enterprise-users to unleash the power of their DJI drones. With development made specifically for the FLIR Zenmuse XT2, DJI Pilot optimizes your flight and aerial imaging process.
Access and adjust Spotlight Pro flight modes
Select area and parameters for Temp Alarm
On-screen temperature measurements
Access to color palette, isotherm, and other thermal settings
A tutorial on how to use the Zenmuse XT2 thermal camera can be foundhere.
A tutorial on capturing great thermal images can be found here.
Compatible with other select batteries (See below)
Ideal for DJI Matrice 600
The DJI Hex Charger is designed for use with dedicated Intelligent Flight Batteries and Remote Controllers. It can charge up to six Intelligent Flight Batteries and two Remote Controllers simultaneously.
DJI Lightbridge 2 Full HD Video Downlink with OSD and Transmitter
$1,259.00
Low-Latency HD Video Downlink
Up to 3.1 Mile Range Line-of-Sight
Picture-in-Picture for Second FPV Camera
View Video and OSD on Mobile Device
SDI and mini-HDMI Outputs on Controller
USB Port for Mobile Device Connection
DJI's Lightbridge 2 is an all-in-one solution that combines video downlink with on screen display (OSD), aircraft control, gimbal control, and video monitoring in a unified system. It breaks into two key components: the first, an air unit that includes connections for select Zenmuse Z15 gimbals as well as connection for A2, A3, or WooKong-M flight controller; the second, a special transmitter (radio controller) that incorporates the Lightbridge ground unit (a separate module on previous systems). The transmitter features mini-HDMI and 3G-SDI video outputs for connecting an HD display and a USB port for connecting a mobile device such as a smartphone or tablet. The transmitter provides dedicated camera and gimbal controls for convenient operation, while more advanced features can be accessed via the DJI GO mobile app.
Integrated Design To simplify both installation and setup, Lightbridge 2 features just two key components: an air unit and a special transmitter (radio controller) that features the ground unit built in.
Dedicated Controls In addition to standard control sticks for piloting, the remote provides direct access to key functions. It has dedicated hardware controls for photo and video capture, gimbal pitch control, Return To Home, as well as customizable buttons.
App-Based Control and Monitoring Use the DJI GO app to control your camera, access intelligent navigation settings, and receive a live HD view of what the camera sees, all on your paired mobile device. Flight information including current status, full telemetry, location, heading, and more is displayed and updated live.
Multiple Output Options A combination of 3G-SDI, USB, and mini-HDMI ports enables the controller to be connected to a variety of display devices – TVs, field monitors, FPV goggles, mobile devices, and more. You can even output video to several devices simultaneously by using a combination of ports.
Dual Video Stream Lightbridge 2 can transmit video from two cameras simultaneously: the main camera used to capture video and photographs, and a second camera showing the First Person View (FPV). Output a picture-in-picture view via mini-HDMI or 3G-SDI to a TV or other external display, where the FPV is layered with the main camera view. The views and controls are completely independent so that the gimbal control will not affect the pilot view or the aircraft's navigation, and vice versa.
Built-In Battery An internal, rechargeable 6,000 mAh LiPo battery lets you fly longer than AA-powered alternatives and simplifies charging.
Dynamic Radio System To help ensure uninterrupted transmission, a high-speed processor chooses the best channel and bandwidth based on current distance and presence of any sources of potential interference. Additionally, when using the DJI GO app, you can choose to maximize video quality or focus on lower latency as well as manually change to your desired transmission channel.
The transmitter (remote controller) has a transmission distance of up to 3.1 miles (5 km), and supports live broadcasting. It includes a gimbal dial, shutter control and record button, Return-to-Home button, as well as customizable buttons. The 6000mAh rechargeable battery has LED lights to indicate the battery status. Equipped with USB, mini-HDMI and 3G-SDI ports, and supports dual video output, framing and live transmission simultaneously. Lightbridge 2 makes complex professional aerial broadcasting a breeze.
Note: This item does not qualify for free shipping.
The Matrice 600 Battery Travel Case can hold up 2 DJI Hex Chargers and 18 Intelligent Flight Batteries (TB47S / TB48S / TB47D / TB48D). Integrated wheels make the travel case easy to maneuver. Using the reserved spaces, batteries can be charged without removing batteries or chargers from the travel case.
Specifications Dimensions: 860 mm x 560 mm x 455 mm (33.9 in. x 22.1 in. x 17.9 in.) Net Weight: 10.5 kg (23.1 lbs) Max Internal Load: 18 kg (39.7 lbs) Compatible Batteries: TB47S / TB48S / TB47D / TB48D Intelligent Flight Battery × 18 pcs Compatible Chargers: MC6S600 (DJI Hex Charger) × 2 pcs Operating Temperature: -10° to 50 ° C (14° to 122 ° F)
The Quick Swap Smart Battery for Ronin Gimbal from DJI is a 4S configuration LiPo battery that, with a capacity of 4350mAh, powers the Ronin for up to six hours, depending on how it is used. The smart circuitry design means no separate balance connector is required when charging, and overcharge and over depletion detection are built-in. Because of this feature, it is very important to only use DJI approved charger.
The Ronin Battery Charger from DJI is a special "smart" charger that does not require a separate balancing connection. Since the Ronin battery features overcharge protection, there is no risk of damaging the battery by leaving it plugged in too long. The included AC cable is used with North American electrical outlets only.
Note: Not compatible with the old 3400mAh battery.
The transmitter for Ronin Gimbal from DJI is a dedicated 2.4 GHz handheld remote controller that comes pre-configured for gimbal operation. With the addition of a dedicated transmitter, one operator can control the UAV platform while a second operates the gimbal pan and tilt remotely. This enables much more precise camera movements than is possible with only a single operator.
The DJI Intelligent Battery was specially designed for the Ronin-M. It has a capacity of 1580mAh, a voltage of 14.4V, and a variety of power management functions. When fully charged, it has a maximum run-time of three hours.
Please only charge the DJI Intelligent Battery with DJI approved charger
DJI Ronin-MX 3-Axis Handheld Gimbal Stabilizer (Camera not included)
$1,599.00
Compatible with DJI M600
Supports RED EPIC, ARRI ALEXA Mini and more cameras
Designed for stability in high G-force environments
3 modes of operation: Upright, Underslung, Briefcase
Auto Tune Stability (ATS) for rapid balancing
Note: The video below is for demonstration purposes only and may not represent actual product.
The Ronin-MX from DJI is dual-use gimbal suitable both for mounting on the Matrice 600 aerial platform as well as deployment closer to the ground. Improving over the Ronin-M, it features magnesium construction to yield high rigidity while keeping the weight down. The gimbal is suitable for cinema cameras, mirrorless cameras, and DSLRs weighing up to 10 pounds. Out of the box it supports two-operator operation, and includes a radio controller (transmitter) for the camera operator. There is also an optional Thumb Controller (available separately) for solo operation. When installed on the Matrice 600 aircraft, the gimbal can be controlled via the DJI GO app. An included universal mounting adapter allows it to be adapted for use with jibs, car mounts, and various other types of camera support equipment. There is also a handlebar for handheld use.
Both ends feature straight plugs. Used to connect cameras with HDMI A ports, such as the RED series, to the SRW-60G Transmitter. Cable length is 80cm (2.6 ft).
One end features a straight plug HDMI A plug and the other an HDMI D angled plug. It is used to connect a camera via HDMI D, such as Panasonic GH4 or Sony A7, to the SRW-60G Transmitter. Cable length is 80cm (2.6 ft).
One end features straight HDMI A plug and the other an angled HDMI C plug. It is used to connect cameras with HDMI C ports, such as Canon 5D or Panasonic GH3, to the SRW-60G Transmitter. Cable length is 80cm (2.6 ft).
DJI Ronin-MX SRW-60G Wireless Short Range Video Link
$309.00
Transmit HD video/images up to 10 meters (32.8 ft)
Use with Ronin series of handheld gimbals
Wireless connection between Ronin-MX and Matrice 600 (Aerial use may be resticted in some regions. Verify with local authorities before purchasing.)
The DJI SRW-60G is a short range wireless video link, which can transmit real time HD video or images for up to 10 meters. Containing both a transmitter and a receiver, it is not only suited for the Ronin-MX and Matrice 600, but can also be used with the Ronin series of handheld gimbals. Convenient video transmission in a meeting room or at home are also a breeze with the SRW-60G.
See the SRW-60G User Manual for additional information and product specifications.
X3 Model Fits Inspire 1, Matrice 100, and Matrice 600
Works with DJI Pilot App
The NDVI X3 Camera Unit is a custom NDVI camera for the Inspire 1 and Matrice 100 platforms. Upgrade your current platform into an NDVI crop mapping drone instantly, using DJI's interchangeable gimbal design.
The Inspire 1 with the NDVI X3 camera already attached can be found here.
Note: Mapping requires an image processing software such as Dronifi, found here.
The Inspire 1 Gimbal and Camera Unit from DJI features the same 4K camera and 3-axis gimbal that is included with ready-to-fly versions of the Inspire 1 quadcopter. It can be used with Inspire 1 - mounting toolessly - or works with the Inspire 1 Camera Mount. The Camera Mount is a separately available handgrip that converts the Gimbal and Camera Unit into a stabilized handheld camera system for use closer to the ground. The gimbal and camera both power from the aircraft flight battery or from a battery that goes with the Camera Mount.
Inspire 1 4K Camera The Inspire 1 Camera shoots 4K video at 24p and 30p, and can shoot HD video frame rates from 24p to 60p. It features a 1/2.3" CMOS sensor with a 94-degree field of view (FOV) lens. This field of view works out to about 20mm in 35mm equivalent, which gives you a wide but not extremely wide or fisheye framing - while not as immersive as a fisheye, this FOV features less distortion and gives the subject more emphasis.
3-Axis Brushless Motor Gimbal The camera is mounted via an integrated 3-axis gimbal which uses brushless servo motors to keep the shot stable and the horizon level. The camera pans a full 360-degrees so that no matter which way the quadcopter turns, the camera can remain locked on the subject. Manual panning and tilting can be affected using controls on the transmitter.
When using the Zenmuse X5 Series cameras, it is necessary to replace the original vibration absorbing board designed for the Inspire 1’s standard Zenmuse X3 camera with the Zenmuse X5 Vibration Absorbing Board found here.
4K video at up to 30fps
Record at 4096×2160 (24fps) or 3840×2160 (30/25fps)
Compatible with Inspire 1 V2.0 and Matrice 600 platforms
Get Closer, See More When shooting aerial, getting closer to your subject meant flying nearer, but no more. The DJI Zenmuse Z3 is an integrated aerial zoom camera based on DJI’s class leading Zenmuse X3 and optimized for still photography. A 7× zoom, made up of 3.5× optical and 2× digital lossless zoom, gives it a focal length ranging from 22mm to 77mm, making it ideal for industrial applications.
Real-Time Zoom View When shooting at the highest possible resolution, i.e. 4K video or 12 megapixel photos, optical zoom can be used, and the zoomed image is instantly visible in the DJI GO live feed. If shooting in 1080p, lossless zoom allows the full 7× of zoom without without sacrificing full-HD image quality.
Enhanced Yaw Stability When a camera is zoomed in the smallest movements are magnified. Adding an additional layer of control to the Z3’s yaw is a custom designed reaction wheel. This works in tandem with the normal yaw motor to allow for more refined and controlled movement.
High Quality Imaging Featuring the same highly refined Sony 1/2.3 inch sensor found on the DJI Inspire 1 2.0 and DJI Phantom 4, image quality is class leading. Still images can be captured at a resolution of 12 megapixels, while Adobe DNG RAW support allows for advanced image editing. Video can be captured at up to 30 frames per second in crisp 4K.
Applications The ability to zoom in the air creates many new opportunities to streamline and enhance industrial and commercial drone use, from power line inspection to search and rescue. It also provides aerial photographers with greater control over composition.
Rapid Setup Flying with the Zenmuse Z3 is as simple as attaching it to the DJI Inspire 1, Matrice 100 or Matrice 600. Once connected, it works seamlessly with the integrated DJI Lightbridge and Lightbridge 2 found on these platforms to provide 3.1mi (5km) of HD transmission range. Aircraft setup can be further accelerated using the DJI SDK to create industry specific aircraft automation protocols that maximize aircraft efficiency.
Flight times when used with a DJI Inspire 1 reach up to 19 minutes, and can even reach 30 minutes when flying a dual-battery equipped Matrice 100 and 39 minutes using the Matrice 600. Longer flight times maximize airtime, increasing the efficiency of industrial and commercial projects while providing photographers with additional time to wait for the right light, compose and capture the perfect shot. All flight times vary based on payload and flight conditions. Maximum flight times are tested with maximum capacity batteries and no additional payload.
Powerful App Control DJI’s GO app is tightly integrated with the Z3, acting as both a live feed to see the camera’s image and the primary control system for the camera. It can be used to change camera settings, swipe to zoom in and out, capture photo or video, and activate Intelligent Flight Modes. Photo and video capture as well as zoom can also be controlled through dedicated controls on the Remote Controller.
Note: The video below is for demonstration purposes only and may not represent actual product.
Aerial platforms are rapidly becoming vital tools for businesses looking to more efficiently collect information crucial to their operations. The Zenmuse Z30 is the first integrated aerial camera with up to 30x optical zoom and digital zoom up to 6x. This camera and gimbal system offers unparalleled image data capture. Enterprise users of DJI products are now able to capture the information they require from a greater range making image data collection significantly faster. Also, the Zenmuse Z30 significantly reduces risk of harm to both personnel and equipment.
MAIN FEATURES
Zoom The Zenmuse Z30 is the most powerful integrated aerial zoom camera on the market with 30x optical and 6x digital zoom for a total magnification up to 180x. Whether you are inspecting cell towers or wind turbines, it enables you to get a detailed look at structures, wires, modules and components for the purpose of detecting defects and damage.
As a result of allowing detailed inspections from a distance without the need to fly close to the subject, not only is speed and efficiency of your operations increased, but the risk of collision is all but eliminated.
STABILIZATION A high-powered zoom means that any movement in the system is magnified, so stability is of utmost importance. The Zenmuse Z30 incorporates DJI’s leading gimbal technology for stabilization within 0.01°, and the same precision for controls. This enables long-range inspection with high reliability.
TAPZOOM With TapZoom, precise collection of visual data is as easy as tapping your finger to point the camera at the subject of your inspection. The Zenmuse Z30 automatically adjusts its focal length to give you an enlarged view, making the most miniscule of details visible in just seconds.
USE CASES
Cell Tower Inspection
As an on-site pilot flies the Zenmuse Z30 equipped airframe they are able to livestream their findings to engineers located anywhere in the world. With live communication, both engineers and pilots can work towards identifying any concerns for the fastest possible inspection.
Wind Turbine Inspection
By using the Zenmuse Z30, you are able to keep the distance from the turbine and still see the condition of the most vital parts of the turbine in incredible detail. As sudden gusts of wind in these areas may affect the aircraft’s navigation, being able to inspect from a distance gives pilots a larger margin of error and helps them avoid collisions.
With advanced tracking features, the difficulty of simultaneously flying the aircraft and operating the camera is eliminated as the turbine is automatically kept centered in the frame. With Point of Interest, you can even set the aircraft to circle the turbine at a constant radius while continuously seeing it in your live HD view.
Fire Fighting
Firefighters depend on having accurate information to base their operations. By using an airframe equipped with the Zenmuse Z30, rescue teams are able to significantly increase speed of operation and the quality of data collected.
At its standard focal length, the Zenmuse Z30’s wide angle provides an overview of a scene. When a detailed view is needed, TapZoom lets operators instantly zoom in to drill down on an area of interest.
Dronifi is a unified data acquisition software platform that delivers tools that professionals need for processing image data and quickly making them presentable to customers across multiple industries. With Dronifi, you can easily:
Upload aerial photos and videos to create 2D orthomosaics and 3D maps of your sites
Analyze the results
Provide customers with portals to access vital actionable information
Compare property snapshots over time with multiple flights
Organize and safely store your work
In addition, Dronifi provides sales and marketing tools to generate more sales for drone service businesses. Co-brand and customize reports with your business logo and messaging. Create a portfolio of flight projects for sales demonstrations branded to your business.
Request for a free demo account by email. Supplies are limited, so act now!
Note: The video below is for demonstration purposes only and may not represent actual product.
PRODUCT SUITE SUBSCRIPTIONS (Choose your subscription above)
Dronifi is dedicated to helping service providers and end users transform aerial imagery to actionable information within a wide range of industries. The following product suites are available on a hassle-free subscription basis.
Dronifi Agriculture Inspect fields to monitor plant health and growth. Increase ROI by improving overall crop health and yield with Dronifi's leading image analysis platform.
Data Allocation: 1 Job site, 10 flights (500 acres max per flight), 5,000 total acres max.
Dronifi Construction Monitor progress at construction sites and track material inventory. Stay on schedule and reduce project cost by improving labor productivity with Dronifi's industry leading image analysis platform.
Data Allocation: 3 Job sites, 20 flights, 600 total acres max.
Dronifi Commercial Real Estate Protect investments by obtaining information for inspecting commercial sites and monitoring property upkeep. Improve property maintenance and track short term and long term repairs with Dronifi's leading image analysis platform.
Data Allocation: 3 Job sites, 20 flights, 600 total acres max.
Dronifi Golf Manage greens on golf courses by assessing and monitor turf health. Improve the beauty and playability on golf courses with Dronifi's leading image analysis platform.
Data Allocation: 1 Job site, 10 flights (200 acres max per flight), 2000 total acres max.
Dronifi Solar Efficiently inspect solar fields and target malfunctioning or under-performing PV modules. Increase solar power productivity and reduce unit downtime by using Dronifi's industry leading image analysis platform.
Data Allocation: 3 Job sites, 20 flights, 1,000 total acres max.
Dronifi Real Estate Quickly create stunning videos and images for marketing and meaningful assessments of homes and properties. Improve property appeal and maintenance with Dronifi's leading image analysis platform.
Data Allocation: 10 Job sites, 50 flights, 500 total acres max.
Dronifi Parks & Recreation Inspect public parks and recreational facilities to monitor their condition and care. Improve facility maintenance programs to provide safer and happier experiences at public facilities with Dronifi's leading image analysis platform.
Data Allocation: 10 Job sites, 50 flights, 1,500 total acres max.
BUNDLED GOLD SUBSCRIPTIONS (Choose your subscription above)
Get unlimited customer demo accounts for a 30-day trial on each platform in the Dronifi product suite which includes Dronifi Agriculture, Dronifi Construction, Dronifi Commercial Real Estate, Dronifi Golf, Dronifi Solar, Dronifi Real Estate, and Dronifi Parks & Recreation. After the 30-day trial period, additional subscription is required.
Receive credits for storage, stitching and analysis of RGB, NIR, Multispectral and Thermal flights.
Dronifi Gold 3-Month Data Allocation: 12 flights with a maximum of 300 total acres. Data usage can be applied to product suites in any combination.
Dronifi Gold 1-Year Data Allocation: 50 flights with a maximum of 1200 total acres. Data usage can be applied to product suites in any combination.
The GoProfessional's DJI Matrice 600 hard case features more than 37 accessory cavities and a proprietary 3 tray configuration. This Matrice 600 case was designed with the guidance of industry professionals and is sure to meet or exceed your needs.
The GoProfessional hard case houses multiple storage cavities to minimize the total number of cases transported to the job site. The case is specifically designed to transport the Ronin-MX, but cavity adjustments are included to accommodate the DJI Zemuse series of gimbals. The case is master crafted with precision water jet engineered foam and housed in a premium military/industrial grade SKB case. Other features include:
Water-jet precision cut closed cell foam that resist water and dust infiltration.
LLDPE Polyethylene impact resistant SKB case
Pressure relief / breather valves
External Dimensions (in.): 26.5 Long x 26.5 Wide x 25.25 Deep
Weight (lbs): 46
Case Fits (Contents not included):
Matrice 600 batteries (12)
Ronin MX batteries (4)
Ronin MX accessories
Matrice 600 transmitters (2)
Hoodman sunshades
Charging hubs and power supplies (3)
Follow Focus accessories (1)
iPads (2)
Camera storage box for the DJI X5, X5R, or XP
Casters (4) (Casters are optional and purchased separately)
