DJI Agras MG-1 Water Pump Controller Board (Buckle included)

Custom Product

Price: Select "Get Custom Package Quote" in Cart

Select this item to order a part not shown on our web store.
Describe the product in the comments section of the quote request.
Provide model, part number, SKU, etc. as applicable.

View full product details »

DJI Agras Battery Balance Cable

$35.00

Same as Agras MG-1S Advanced Battery Balance Cable (Part 64)
Required to charge MG-1P battery using the 2-port MG-1/MG-1S/MG-1P Battery Charger.
Actual product may look different from photo

View full product details »

DJI Agras Battery Transfer Cable

$40.00

Same as Agras MG-1S Advanced Power Cable Adapter (Part 80)
Required to charge MG-1 or MG-1S battery using the 6-port MG-1/MG-1S/MG-1P Battery Charger found here.
MG-1S battery plug adapter for MG-1P drone

View full product details »

DJI Agras Battery XT90 Shorting Plug

$16.00

Same as MG-1S Advanced XT90 Shorting Plug (Part 63)
MG-1P battery plug adapter for DJI Agras MG-1, MG-1S drones
Required to charge MG-1P battery using the 2-port MG-1/MG-1S/MG-1P Battery Charger.

View full product details »

DJI Agras MG Spreading System

Price: Select "Get Custom Package Quote" in Cart

The MG Spreading System is compatible with the DJI Agras MG-1S and MG-1P aircraft. It offers efficient, reliable and stable spreading operations when dispensing dry material of a diameter between 0.5mm to 5mm (0.02" to 0.20"). The material delivery rate is accurately controlled by the built-in stirring device and the hopper gate.

The DJI MG app is required to set parameters such as hopper outlet size and spinner disk rotating speed. The app also provides information such as empty tank warning and abnormalities in disk speed, temperature, and hopper outlet size.

Note: Please allow about 3 to 4 weeks to ship.

Specifications

Weight: 1.8 kg
Hopper Volume: 13 L
Hopper Maximum Load: 10 kg
Material Diameter: 0.5 mm to 5 mm (0.02" to 0.20")
Max. Hopper Outlet Area: 8.6 cm²
Spreading Range: 4 m to 6 m

In the Box

Spreading Hopper (1)
Spinner Disk (2 Spare)
Landing gear extender (4)
M3 Screw (6)

View full product details »

DJI Agras MG-1 Spray Nozzle Kit

$105.00

DJI Agras MG-1 Nozzle Kit (Part 1)
Industry-standard ceramic nozzle
360° degrees atomized spray pattern
Includes 2 nozzles and tubes
Easy installation

View full product details »

DJI Agras MG-1 Spray Tank Inlet Cap and Outlet Cap Kit

$12.00

Spray tank inlet cap and outlet cap replacement kit (Part 46)
Outlet mesh filter included

View full product details »

DJI Agras MG-1 Water Pump Kit (Buckle included)

$110.00

Water pump kit (Buckle included) (Part 34)

View full product details »

DJI Agras MG-1 Water Tank Repair Kit Part 1

$16.00

Water tank repair kit Part 1 (Part 39)

View full product details »

DJI Agras MG-1 Water Tank Repair Kit Part 2

$16.00

Water tank repair kit Part 2 (Part 40)

View full product details »

DJI Agras T16 Intelligent Battery Charger

$1,159.00

Power: 2600 Watts
Charge 4 Batteries Simultaneously
Can be used to charge the Agras T16 Batteries, MG-1P batteries, MG-1S batteries, and MG-1 batteries.

Note: The Battery Transfer Cable is required as an adapter to charge MG-1 or MG-1S battery.

Up to four batteries can be charged simultaneously. When using the single-channel quick charging mode, a full charge only takes 20 minutes. The charger has a built-in battery health management system that monitors critical data in real time, such as voltage and temperature, to ensure charging safety.

View full product details »