$890.00
$1,120.00
$1,280.00
$1,399.00
DIALS, LEVERS, and KNOBS
The two knobs on the front panel control gimbal pitch and yaw, and the right/left levers and Focus Adjustment Knob are used to tune flight controller settings and the gimbal camera in real-time, allowing the operator to focus and set aperture.
CAMERA SETTINGS
For quick camera adjustments, the operator can customize several shortcut buttons for particular groups of settings, or save frequently used settings.
CUSTOM CONTROL
Customizable buttons can quickly enable or disable frequently used functions like focus peaking, color waveform, obstacle avoidance, and home point resetting; or close warnings and tips midflight, all without using an app.
BUTTON COMBINATIONS
Rotate the dials or the toggle the right/left levers while holding applicable buttons to control gimbal roll, shutter speed, aperture, or ISO.
DETACHABLE DESIGN, CRYSTALSKY COMPATIBILITY
The CrystalSky monitor mounts to the Cendence remote controller via the Cendence Monitor Mounting Bracket.
The Cendence remote controller’s antennas, PCB, mounting bracket, and battery are all detachable, making its hardware easily upgradable, allowing you to customize the controller for compatibility with future DJI aircraft.
DUAL OPERATOR CONTROL
When precision camera control is required, the Cendence remote controller can connect as either a master or slave controller with the Inspire 2’s remote controller or another Cendence remote controller.
MULTIPLE PORTS
BATTERY SYSTEM
Cendence uses a detachable battery that operates for up to four hours. If you run out of power, just swap in a charged battery or charge Cendence via the power port. Cendence uses the same batteries as CrystalSky monitors, reducing accessories.
IN THE BOX
Cendence Remote Controller × 1
WB37 Intelligent Battery × 1
Cendence Monitor Mounting Bracket × 1
Cendence Remote Controller Support Rig × 1
Screwdriver × 1
Screw × 2
Cendence Control Stick Cover × 2
Cendence Control Stick Cover Mounting Key × 1
Remote Controller Strap × 1
$29.00
The control stick covers protect your equipment by preventing dust from entering the remote controller through the moving surfaces at the base of the control sticks. The elastomeric bellow design maintains smooth and reliable movement of the control sticks.
$749.00
Video Transmission System
The latest update to DJI Lightbridge technology has an effective transmission distance of up to 4.6mi (7km)* and is capable of delivering both 1080p/720p video as well as FPV to pilot and camera op. Users can also switch between 2.4GHz and 5.8GHz** control frequencies to cut through noise for greater signal stability.
*Unobstructed, free of interference, FCC compliant.
**5.8GHz transmission is not available in some regions due to local regulations.
Master and Slave Controllers
New wireless HD image transmission technology sends video information from the master controller to the slave controller and the two controllers can be up to 100m apart without loss of image quality.
Broadcast mode
Broadcasters can broadcast direct from the Inspire 2 using its dedicated 1080i50 and 720p60 transmission signal. Aerial live-streaming direct to TV is as simple as connecting the Inspire 2 remote controller to the satellite truck.
$739.00
The transmitter (remote controller) integrates video downlink and aircraft control into one system. The combined system operates at 2.4 GHz with a maximum signal transmission range of 5 km. The device features a number of standard and customizable buttons that allow users to quickly access certain aircraft functions, such as taking and reviewing photos/videos, as well as controlling the gimbal and landing gear. It is powered by a 2S rechargeable battery.
Operating Frequency: