Free shipping on domestic orders over $500 !

DJI Zenmuse Z15-BMPCC Specifications

November 01, 2016

Below are technical specifications for the DJI Zenmuse Z15-BMPCC gimbal. The information is from DJI website. I hope this helps.

GENERAL

Built-In Functions
  • Three Working Modes
    · Orientation-locked control
    · Non orientation-locked control
    · FPV mode (Reset)
  • Built-in independent IMU module
  • DJI gimbal special servos drive module
  • HDMI-AV/HD module
  • Wireless video transmission supported
  • Camera record control supported
  • Wide range voltage input supported
  • S-Bus/PPM Receiver supported

MECHANICAL & ELECTRICAL CHARACTERISTICS

Working Current Static current: 200mA (@25V)

Dynamic current: 400mA (@25V)

Locked-rotor current: 1.8A (@25V)
Operating Temperature -10°C ~ 50°C
Weight 1.26Kg
Dimensions 227mm(H) × 212mm(D) × 210mm(W)
GCU Weight 63g
GCU Dimensions 64.2 mm ×34.1mm ×19.5mm

PERIPHERAL

Supported Camera BMPCC
Current Supported Lens OLYMPUS M.ZUIKO DIGITAL ED 12mm f/2.0
GCU Input Power 4S~12S LiPo (Recommend 6S if used with the S800 EVO/S1000)
Control Requirement Minimum of four spare receiver channels
Assistant Software System Requirement Windows XP SP3; Windows 7; Windows 8 (32 or 64 bit)

WORKING PERFORMANCE

Load Weight (Reference Value) 487g(@BMPCC with OLYMPUS M.ZUIKO DIGITAL ED 12mm f2.0, Battery and SD-Card)
Controlled Angle Accuracy ±0.01°
Maximum Controlled Rotation Speed Pan axis: ±130°/s

Tilt axis: ±130°/s

Roll axis: ±30°/s
Controlled Rotation Range Pan axis control: ±360° continuous rotation

Tilt axis control: +50°/-140°

Roll axis control: ±40