Free shipping on domestic orders over $500! *** Click on Promotions tab and get discount codes for your next purchase!

DJI Zenmuse Z15-A7 Specifications

November 01, 2016

Below are technical specifications for the DJI Zenmuse Z15-A7 gimbal. The information is from DJI website. I hope this helps.

GENERAL

Built-In Functions
  1. Three Modes
    · Orientation-locked control
    · Non orientation-locked control
    · FPV mode (Reset)
  2. Built-in independent IMU module
  3. DJI gimbal special servos drive module
  4. HDMI-HD/AV module
  5. Infrared remote control module
  6. Wireless video transmission supported
  7. Camera shutter/video recording control supported
  8. Wide range voltage input supported
  9. S-Bus Receiver supported

MECHANICAL& ELECTRICAL CHARACTERISTICS

Working Current Static current: 200 mA (@25 V)

Dynamic current: 400 mA (@25 V)

Locked-motor current: 4 A (@25 V)
Operating Temperature -10°C ~ 50°C
Weight 1.3 Kg
Dimensions 210mmX204mmX246mm
GCU Weight 63g
GCU Dimensions 64.2 mm ×34.1mm ×19.5mm

PERIPHERAL

Supported Camera Sony ILCE-7S; Sony ILCE-7R
Supported Lens Sony FE 35 mm f2.8 ZA
GCU Input Power 4S~12S LiPo (Recommend 6S if with S1000+)
Control Requirement At least four spare receiver channels
Assistant Software System Requirements Windows XP SP3; Windows 7; Windows 8 (32 or 64 bit)

WORKING PERFORMANCE

Load Weight (Reference Value) 622 g(@Sony ILCE-7S with Sony FE 35 mm f2.8 ZA, battery, lens hood and SD Card)
580 g(@Sony ILCE-7R with Sony FE 35 mm f2.8 ZA, battery, lens hood and SD Card)
Angular Vibration Range ±0.01°
Maximum Controlled Rotation Speed Pan axis: ±130°/s

Tilt axis: ±130°/s

Roll axis: ±30°/s
Controlled Rotation Range Pan axis control: ±360° continuous rotation
Tilt axis control: +50°/-140°
Roll axis control: ±40°