Free shipping on domestic orders over $500! *** Click on Promotions tab and get discount codes for your next purchase!

DJI Zenmuse Z15-5D Specifications

November 01, 2016

Below are technical specifications for the DJI Zenmuse Z15-5D gimbals. The information is from DJI website. I hope this helps.

General

Built-In Functions
  • Three Working Modes
    · Orientation-locked control
    · Non orientation-locked control
    · FPV mode (Reset)
  • Built-in independent IMU module
  • DJI gimbal special servos drive module
  • Wireless video transmission supported
  • Camera shutter control supported
  • Wide range voltage input supported
  • S-Bus/PPM Receiver supported
  • 360° panoramic photograph function (-5D III HD)
  • Auto-calibration function (-5D III HD)

    Peripheral

    Supported Camera
    CANON EOS 5D MARK II; CANON EOS 5D MARK III
    Current Supported Lens
    CANON EF 24mm f/2.8 IS USM
    GCU Input Power
    4S~12S LiPo Battery (Recommend 6S if with S1000)
    Control Requirement
    Four spare receiver channels at least
    Assistant Software System Requirement
    Windows XP SP3; Windows 7; Windows 8 (32 or 64 bit)

    Mechanical & Electrical Characteristics

    Working Current
    Static current: 200mA (@25V)

    Dynamic current: 400mA (@25V)

    Locked-rotor current: 4A (@25V)
    Operating Temperature
    -10°C ~ 50°C
    Weight
    1.42Kg
    1.53Kg (-5D III HD)
    Dimensions
    204mm x 242mm x 264mm
    281mm x 242mm x 222mm (-5D III HD)
    GCU Weight
    63g
    GCU Dimensions
    64.2 mm ×34.1mm ×19.5mm

    Working Performance

    Load Weight (Reference Value)
    2615g(5D MARK II with SD Card & Battery & CANON EF 24mm f/2.8 IS USM Lens)
    2664g(5D MARK III with SD Card & Battery & CANON EF 24mm f/2.8 IS USM Lens)
    Controlled Angle Accuracy
    ±0.02°
    Maximum Controlled Rotation Speed
    Pan axis: ±90°/s

    Tilt axis: ±130°/s

    Roll axis: ±30°/s
    Controlled Rotation Range
    Pan axis control: ±360° continuous rotation

    Tilt axis control: From -90° to +15°
    Roll axis control: ±25°